2026-04-10Views：
The air filter of the air compressor system is the first barrier of the screw air compressor. The quality of the air filter is very important. If the quality of the air filter is not good, just like people, the disease enters from the mouth. If the quality of the air filter is not good, customers will waste a lot of electricity bills, and it will directly affect the service life of oil, oil filter, oil, bearings, etc.
However, the quality of the air filter is precisely the most easily overlooked problem among users of screw air compressors. Many people do not attach importance to the quality of the air filter and think that as long as it can be used, only when the air filter is deformed and the air compressor fails, they will know how bad the inferior air filter is, and he does not know what is the cause, just replace the air filter.
Whether the air filter quality is good or not is not simply a matter of price, nor is the more expensive the better, but usually the air filter price of good quality will be relatively higher, but it will not be too far apart (the air filter price of high quality PU glue will be about 20-30% higher, and the air filter price of high quality iron cover will be about 40-50% higher). The most important thing is to learn how to distinguish the air filter quality in order to get good quality, the price is not particularly high air filter, screw air compressor air filter quality is not good, mainly depends on three aspects:
1 Waterproof performance
we all know that the air contains a lot of water, especially in rainy days, the water content in the air will be higher. Once the air filter has poor waterproof performance, the air filter is easy to get damp, and the air filter is Fl. Tide will affect the air compressor suction smooth, or even blocked, customers will therefore waste a lot of electricity.
II. Filtration accuracy
if the filtering accuracy is not high, a large amount of slightly smaller dust and impurities will be sucked into the screw empty twisting machine, which will affect the service life of oil, oil, oil filter, bearings, etc.
Three. Permeability
if the air permeability is not good, it will affect the smooth suction of the screw air compressor, and it is also easy to block, and customers will waste a lot of electricity.
To detect the quality of the air filter, we should start from the following three aspects:
1. Water detection, this is also the most critical and simplest method to identify. For the inexperienced, water is the best way to detect the quality of the air filter. Put the air filter flat on the ground or on the table, and sprinkle it on the filter paper. Some water:
(1) If the filter paper seeps into the water within 5 minutes, it is an air filter made of cotton pulp paper and absolutely cannot be used. This kind of goods are mostly produced in Hebei, and this kind of goods are used by a few cheap people in the screw air compressor industry.
(2) If the filter paper that seeps into water within 2-5 hours is made of low-grade wood pulp paper, it can be used, but it will affect the scavenging efficiency of the screw air compressor (more power consumption and less pumping). As the air filter made of this filter paper is relatively low in price, it can also be used on the screw air compressor (more power consumption and less pumping are wasted customers' money), so the air filter paper in the air compressor industry now accounts for the mainstream, the vast majority of screw air compressor shops use this kind of filter paper for air filtration.
(3) If the filter paper seeps in for 12-15 hours, it is a passable filter paper (mid-range filter paper). Usually, the domestic screw air compressor factory with better quality uses the air filter of this type of filter paper as the original consumables.
(4) If the filter paper does not penetrate water for 24 hours, it is definitely an excellent product (high-grade filter paper). Usually, the air filter of this type of filter paper is selected as the original consumable by the high-grade machine factory.
2, to the light to see whether the filter paper is uniform, light transmittance is good, see whether the filter paper surface finish is good, filter paper to the light to observe uniform and detailed, good light transmittance, surface finish is good, indicating that the filter paper filtration accuracy, good breathability (this a simple identification method requires a little experience).
3, look at the depth of the filter paper, the number of folds, if the filter paper is deep, the number of filter paper folds, indicating that the air filter filter area is large, the air filter area is large, the air permeability will be better.
Air filter to achieve good waterproof performance, is not particularly difficult, as long as the use of high-quality wood pulp filter paper can meet the requirements, but the production cost will be slightly higher, the real difficulty is not only to meet the filtration accuracy, but also to meet the air permeability, can meet the requirements of these three aspects is the real good air filter.
Finally, I hope everyone will be diligent in cleaning the air filter and cleaning the air filter. It is not only to better protect the screw air compressor, but also to save electricity charges (dust attached to the surface of the air filter will affect the smooth suction). Users with especially bad environment are better to clean the air filter once a day, replace the air filter within 500-800 hours, clean the air filter within 3-7 days for customers with medium environment, and replace the air filter within 1000-1500 hours. Customers with good environment! Replace the air filter once 500-2000 hours.
In recent decades, the research on oil-free screw compressors has become increasingly active, and many countries and enterprises have begun to explore the road of oil-free screw compressors on the basis of the original oil-injected screw compressor models. In areas with high gas quality requirements, such as textiles, metallurgy
What kind of oil is used in the air compressor? Does the oil-free air compressor not use lubricating oil? The oil-free air compressor refers to the use of lubricating oil (synthetic oil or semi-synthetic oil) in the air compressor system to lubricate the machine and dissipate heat. This kind of air compressor, the compressed air will have a certain amount of lubricating oil, that is, the post-processing equipment is used for filtration, but it is still
In the case of permanent magnet variable frequency screw air compressor which is good to use (commonly used single-stage compression screw machine), the permanent magnet variable frequency air compressor is often unfamiliar with the equipment of permanent magnet variable frequency air compressor and does not know what brand of permanent magnet variable frequency compressor to choose.
Shanghai granklin group is a professional design, research and development, production, sales and service of screw compressors, and has a global procurement, sales and technical support network. Because it is committed to providing customers with new energy-saving products with excellent cost performance, it has a professional and detailed compressor air source system solutions.
Many people see this problem will think, oil-free air compressor is certainly not oil, oil compressor is oil. But in fact, this statement is not rigorous. Today, I 'd like to introduce it to you in detail.
The difference between an oil-free air compressor and an oil-free air compressor is seen from the oil content. The oil-free and oil-free air compressor generally refer to the oil content of the gas discharged from the exhaust port of the air compressor. Generally, the oil content of an oil-free air compressor is large, and the oil content of an oil-free air compressor is 0.01ppm, so
During the operation of the screw air compressor, the moisture in the compressed air is easy to condense in the oil and gas separator, causing equipment failure. Therefore, it is necessary to regularly discharge the condensed water in the air compressor system, especially when the weather is humid or the temperature is high, the condensed water will produce more.
Bearing lubrication method of oil-free and water-lubricated air compressor: 1. Oil-free and water-free air compressor mainly uses water to replace oil, realizing the four major effects of lubrication, cooling, sealing and noise reduction, providing high-quality oil-free air, no pollution and no special treatment for discharged water, which meets the requirements
Granklin air compressor is the first choice. The air compressor produced by Granklin Group adopts water lubrication, the whole machine is made of stainless steel, and the compressed gas is 100% free of oil. The traditional method of determining the compressed air requirements of a new air compressor is to use the gas volume of all gas-using equipment.
When the single screw is running, the screw and the star wheel have a speed difference, one-way compression, air is easy to compress, and the speed is low. The twin-screw is co-extrusion, which requires high speed, and the lubrication of water is not enough compared to the oil density, and the compressed air is easy to flow backwards. The lubrication part is water, pure water. Air contains absolutely no oil, but it contains water. In the field of high gas quality requirements, such as textile, metallurgy, food, chemical industry, petroleum and air separation and other places that need pure oil-free compressed air, oil-free screw compressor can provide high-quality compressed gas to meet various needs, so the application prospect is broad.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
