2026-04-10Views：
1. Maintenance of the air compressor oil filter: The air compressor oil filter can remove impurities in the oil to keep the lubricating oil clean. Assuming that the air compressor oil filter is not maintained, the oil filter will be blocked, the impurities in the oil will increase, resulting in premature wear and damage of the compressor body bearing. The decrease in oil supply will cause the temperature of the air compressor to rise, resulting in abnormal shutdown. Together, the internal dirt of the air compressor oil circuit system will pose a hidden danger to the safety. Air compressor oil filter maintenance method: replace the new air compressor oil filter (directly affect the serious shortcomings of the compressor, it is necessary to use genuine, replacement time in 3000 hours).
Air compressor
2. Maintenance of air compressor oil and gas separator: Air compressor oil and gas separator can separate lubricating oil and air from the air after finishing the tightening process, and recycle lubricating oil to send out the tightening air. Assuming that the non-maintenance of the oil mist separator of the air compressor will lead to an increase in the discharge temperature of the air compressor (abnormal interruption), an overcurrent (abnormal interruption), an increase in the consumption of electricity (loss of electricity charges), and an accelerated deterioration of the oil due to the increase in the oil temperature. Oil is discharged on the production line (oil consumption is large). If there are many impurities accumulated, burnout will occur.
3. Maintenance of lubricating oil for air compressor: lubricating oil for air compressor can lubricate, cool and seal the driving part (bearing and other parts) so that the air compressor can play its maximum function. Assuming that no maintenance of lubricating oil for air compressor will lead to deterioration of lubricating oil, damage to the compressor body can be caused when the function of the compressor body is severe. Dirty gambling plug in the oil circuit system will cause the spit out temperature to rise and stop abnormally. Maintenance method of lubricating oil for air compressor: stop the air compressor, admit that there is no pressure to discharge all the old lubricating oil (all inside the oil recovery device, oil cooler and compressor body), and fill in new lubricating oil (the oil level is between the H-L of the oil level gauge during operation).
4. Maintenance of air filter of air compressor: air filter of air compressor can remove dust and prevent oil from getting dirty, oil filter and oil mist separator filter element from blocking. Assuming that the air filter of the air compressor is not maintained and the air production decreases, resulting in a pressure drop, which will accelerate the speed of oil deterioration, resulting in blockage of the oil mist separator, resulting in abnormal interruption of the air compressor or increased power consumption, resulting in loss of electricity charges. Failure to maintain the air filter of the air compressor together will result in blockage of the oil filter, increasing impurities in the oil, resulting in premature wear and damage of the bearing of the compressor body.
Linyi Air Compressor Factory Screw Machine Quotation? Linyi, a prefecture-level city in Shandong Province, is located in the southeast of Shandong Province, the west bank of the Yellow Sea, the junction of the Yangtze River Delta Economic Circle and the Bohai Rim Economic Circle, the national key development area of the East Longhai Sea and the port industrial belt in southern Shandong Province. Granklin air compressor brand combines the "power" of air compressor with the "application" of pneumatic tools to achieve a complete screw air compressor with integrated power and application, which has won the support of our customers.
View detailsGenerally speaking, in the design of the air compressor, there is a design scheme of operating environment temperature (30-40 degrees). When the marine air compressor manufacturer operates at the operating ambient temperature of the design scheme, the high temperature is basically close to the maintenance temperature of the air compressor. If the ambient temperature of the air compressor is higher than the operating ambient temperature of the design scheme, the temperature of the screw air compressor will rise, causing the equipment to stop at high temperature.
The main maintenance method of screw air compressor is to replace the three filters and one oil. The main methods are: 1. Air filter element. It needs to be replaced after 1500 hours of work; 2. Lubricating oil filter element. Daily use about 2000 hours need to be replaced; 3, oil and gas
A large area of the country has cooled down. At too low a temperature, everyone is sitting on the work station, drinking tea or watching the latest news. The severe cold weather has brought inconvenience to the broad masses of the people, and the cycle of spring, summer, autumn and winter has been repeated. The oil-free air compressor has also reached the failure frequency.
From environmental protection and maintenance, of course, it is oil-free air compressor. Oil-free air compressor is a technical improvement of oil-free air compressor. The main difference between oil-free air compressor and oil-free air compressor is the oil content of the gas discharged from the exhaust port. Oil-free air compressor
The replacement cycle of air compressor oil is divided into three situations: 1. Mineral oil is replaced every 3 to 4 months; 2. Semi-synthetic oil is replaced every 6 to 8 months; 3. Fully synthetic oil is replaced every 10 to 11 months. The air compressor shall have the following conditions
Choose air compressor according to the needs of different industries and working conditions, there are corresponding standards. Then how to choose a suitable oil-free air compressor? 1. First figure out what is an oil-free air compressor and why should it be used? The oil-free air compressor has been running
Air compressor safety management measures 1, air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Use of oil
The air compressor produced by Granklin Group is water-lubricated, and the water content in the compressed gas will be relatively high, so how can the gas be treated to be free of water? At the rear end of the water-lubricated air compressor, we need to configure a gas tank to store the compressed gas. The air storage tank can be drained by an automatic drain, and there is a frozen type of drying at the rear.
As a kind of driving power energy, the application scenario of air compressor is more common and plays a very important role in all production and processing. However, in the operation of the air compressor, the actual effect of refrigeration and heat transfer is not very good, the working pressure is abnormal, and the displacement is not enough.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
