2026-04-10Views：
in order to ensure the normal and reliable operation of the air compressor and ensure the service life of the unit, a detailed maintenance plan shall be formulated, and the operation, regular maintenance and regular inspection and maintenance shall be carried out to keep the air compressor clean, oil free and dirt free. Maintenance of main components:
1, according to the requirements of maintenance and replacement of the parts must be done: the pressure in the air compressor system has been released, and other pressure sources have been separated, the main circuit switch has been disconnected, and has been done not to close the safety signs.
2. The replacement time of the screw air compressor lubricating oil depends on the use environment, humidity, dust and whether there are acid and alkaline gases in the air. The new machine must be replaced with new oil for the first 500h of operation, and then replaced every 4000h according to the normal oil change cycle. Machines with annual operation less than 4000h shall be replaced once a year.
3, the oil filter in the first boot operation 300-500h must be replaced, the second time in the use of 2000h replacement, after the normal time every 2000 hours to replace.
4, maintenance and replacement of air filter or intake valve remember to prevent any debris into the compressor host cavity. When operating, the entrance of the host is closed. After the operation is completed, rotate several circles by hand according to the rotation direction of the host to make sure there is no obstacle before starting the machine.
5. Check the tightness of the belt every 2000h or so when the machine runs. If the belt is loose, adjust it until the belt is tight. In order to protect the belt, it is necessary to prevent the belt from being scrapped due to oil pollution during the whole process.
Every time the oil is changed, the oil filter must be replaced at the same time.
7, replace the parts as far as possible with the original parts, to avoid subsequent problems affecting the production of enterprises.
The above is the daily maintenance of air compressor.
In order to ensure the normal and reliable operation of the air compressor and ensure the service life of the unit, a detailed maintenance plan shall be formulated, and the operation, regular maintenance and regular inspection and maintenance shall be carried out to keep the air compressor clean, oil free and dirt free. Maintenance of main components:
Linyi Air Compressor Factory Screw Machine Quotation? Linyi, a prefecture-level city in Shandong Province, is located in the southeast of Shandong Province, the west bank of the Yellow Sea, the junction of the Yangtze River Delta Economic Circle and the Bohai Rim Economic Circle, the national key development area of the East Longhai Sea and the port industrial belt in southern Shandong Province. Granklin air compressor brand combines the "power" of air compressor with the "application" of pneumatic tools to achieve a complete screw air compressor with integrated power and application, which has won the support of our customers.
View detailsGenerally speaking, in the design of the air compressor, there is a design scheme of operating environment temperature (30-40 degrees). When the marine air compressor manufacturer operates at the operating ambient temperature of the design scheme, the high temperature is basically close to the maintenance temperature of the air compressor. If the ambient temperature of the air compressor is higher than the operating ambient temperature of the design scheme, the temperature of the screw air compressor will rise, causing the equipment to stop at high temperature.
The main maintenance method of screw air compressor is to replace the three filters and one oil. The main methods are: 1. Air filter element. It needs to be replaced after 1500 hours of work; 2. Lubricating oil filter element. Daily use about 2000 hours need to be replaced; 3, oil and gas
A large area of the country has cooled down. At too low a temperature, everyone is sitting on the work station, drinking tea or watching the latest news. The severe cold weather has brought inconvenience to the broad masses of the people, and the cycle of spring, summer, autumn and winter has been repeated. The oil-free air compressor has also reached the failure frequency.
From environmental protection and maintenance, of course, it is oil-free air compressor. Oil-free air compressor is a technical improvement of oil-free air compressor. The main difference between oil-free air compressor and oil-free air compressor is the oil content of the gas discharged from the exhaust port. Oil-free air compressor
The replacement cycle of air compressor oil is divided into three situations: 1. Mineral oil is replaced every 3 to 4 months; 2. Semi-synthetic oil is replaced every 6 to 8 months; 3. Fully synthetic oil is replaced every 10 to 11 months. The air compressor shall have the following conditions
Choose air compressor according to the needs of different industries and working conditions, there are corresponding standards. Then how to choose a suitable oil-free air compressor? 1. First figure out what is an oil-free air compressor and why should it be used? The oil-free air compressor has been running
Air compressor safety management measures 1, air compressor must have a pressure gauge and safety valve. The pressure gauge must be calibrated regularly. The safety valve and pressure regulator must act reliably, and the operating pressure of the safety valve shall not exceed 1.1 times of the rated pressure. Use of oil
The air compressor produced by Granklin Group is water-lubricated, and the water content in the compressed gas will be relatively high, so how can the gas be treated to be free of water? At the rear end of the water-lubricated air compressor, we need to configure a gas tank to store the compressed gas. The air storage tank can be drained by an automatic drain, and there is a frozen type of drying at the rear.
As a kind of driving power energy, the application scenario of air compressor is more common and plays a very important role in all production and processing. However, in the operation of the air compressor, the actual effect of refrigeration and heat transfer is not very good, the working pressure is abnormal, and the displacement is not enough.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
