Summer to the permanent magnet frequency conversion oil-free air compressor need to pay attention to what

Summer to the permanent magnet frequency conversion oil-free air compressor boot after the need to pay attention to what?

At this time, people are afraid of heat. We need to stay in the air-conditioned room, blowing the air conditioner and drinking iced drinks. High temperature weather is not only a test for people, but also a frequent failure stage for oil-free air compressors. The most common high temperature phenomenon in summer will cause various failure problems of oil-free air compressor.

If the oil-free air compressor is running in a high temperature environment for a long time, it will accelerate the deterioration of the materials and seriously affect the displacement of the air compressor unit; increase the wear of the parts and shorten the service life of the machine; when the temperature rises too high, it will also It will cause the machine to stop at high temperature.

In addition, for the permanent magnet frequency conversion oil-free air compressor, degaussing is the biggest risk, if the operating temperature is too high, it is easy to make the permanent magnet motor demagnetization. Therefore, high temperature is one of the main problems that plague major users, and it is also the most afraid of permanent magnet frequency conversion oil-free air compressors.

There are many reasons for the high temperature failure of permanent magnet frequency conversion oil free air compressor, and the common reasons are:

1. The "three filters" have been blocked or damaged, resulting in the inability to play a good filtering effect;

2. The use of the environment is not good, poor ventilation, close to the heat source, etc;

3. The cooling fan fails, the cooler is blocked or malfunctions;

4 .. temperature sensor or temperature control valve failure.

For the high temperature failure of the oil-free air compressor, as long as the maintenance is done regularly, pay attention to check the causes that may cause the high temperature of the machine, and solve the problem in time, it is not terrible. What I fear most is that if I find a problem, I will not report it, if there is a problem, I will never do the maintenance of the unit, so I will need to change the machine soon.