What does air compressor flow mean?
The air compressor flow rate is how much gas this machine can spit out per minute. You can understand it as the water output of the faucet, but it is not water, but compressed air.
Compressed Air System Technology & Application References
Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Technical Articles List 9
-
View Details
-
View Details
The main use of nitrogen in semiconductor factories
Nitrogen does six main things in a semiconductor factory. When the protective gas prevents the oxidation of materials, when the purging gas cleans the equipment and pipelines, when the carrier gas helps other gases transport, when the ambient gas maintains a clean positive pressure, when the protective umbrella is packaged and tested, and when welding, the solder is prevented from oxidizing.
-
View Details
What is the role of medical air compressor
There are a lot of equipment in the hospital is driven by compressed air. For example, the high-speed small drill used in dentistry relies on compressed air to turn it up to show the patient's teeth. There is also an atomizer, which is the kind of device that turns the liquid medicine into a tiny mist for the patient to inhale. It also works by compressed air.
-
View Details
How to calculate the air consumption per minute of the equipment
Add up the demand for each gas point, plus the pipeline loss and a certain safety margin, is the gas consumption per minute you really need. Then use this number to select the matching air compressor will not go wrong.
-
View Details
What are industrial compressors used?
What industrial compressors do boils down to one thing: turn air into power and send it to where it is needed. With the right equipment, the system and the maintenance, this unknown machine can reduce accidents in the production line.
-
View Details
General factory air source pressure how much bar
There is no universal figure for the air supply pressure in the factory. 6 to 10bar is the most common range, but it is ultimately determined according to the actual running equipment in the workshop, the length of the pipeline and the fluctuation rhythm of the air consumption. If the pressure is set correctly, the equipment will run steadily and the energy consumption will not be wasted on the excess pressure drop.
-
View Details
What is the atmospheric oil content in the general air compressor room?
The oil content of compressed air in ordinary air compressor room is usually in the range of 3~5 mg/m, while the production line that requires the quality of air source will press this value to 0.01 mg/m or even lower through oil-free water lubrication air compressor or precision oil removal equipment at the rear end. When selecting the type, the actual demand of the gas end should be clearly defined, and then the equipment should be matched, so that the oil content will not be wasted.
-
View Details
Fermentation matching air compressor
Fermentation production relies more heavily on compressed air than many people think. From seed tank inoculation, fermentation tank stirring to post-filtration and filling, each link is inseparable from a stable gas supply. However, the fermentation environment is quite special, there are a large number of microorganisms in the tank, and there are clear requirements for the cleanliness and water content of the gas. Once the gas is mixed with oil or too much water, it is likely to affect the activity of the bacteria, resulting in fluctuations in the quality of the batch of products.
-
View Details
How long does an oil-free air compressor take maintenance?
Compressed air is the basic power source of many industrial production lines, driving cylinders, controlling valves, driving spraying and packaging equipment, almost throughout the entire production process. The oil-free air compressor is used more in food, electronics, medicine and other scenes where the cleanliness of the gas source is required because the output gas does not contain oil. Whether the equipment can supply gas continuously and stably, the setting of maintenance cycle is a key issue.
-
View Details
Whether the oil-free grade for food and medicine is class1 and 2
The food and pharmaceutical industries cannot cope with all scenarios with relatively clean air alone. The place in direct contact with the product must use the cleanest gear, and the auxiliary link can use the cleaner gear. Oil-free water-lubricated air compressors are a reliable choice to meet these different needs. They fundamentally solve the problem of oil pollution and make food and pharmaceutical production more comfortable.