Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The water-lubricated screw air compressor produced by Shanghai Granklin Group has a large number of cases to visit in China and around the world. When selecting the air compressor, you may wish to refer to it.
The air compressor room system of the power plant is the aerodynamic center of the entire power plant. From instrument control to ash transportation, cooling, maintenance, and safety, it is inseparable from it everywhere. However, the water lubricated oil-free screw air compressor has become the mainstream choice of many power plants in the instrument gas and key control links with high air quality requirements because the air is clean and oil-free and maintenance is worry-free.
Oil-injected air compressors not only drain but also drain oil, which is a heavy maintenance burden. The water-lubricated oil-free screw air compressor only needs to drain, and the drain is clean water, which is much simpler to maintain. If you are using a fuel injection machine now, don't be lazy about drainage.
The idea of the food-grade compressed air transportation scheme is: lubricate the oil-free screw air compressor with water to ensure that the air is oil-free from the source, then dry and multi-stage filtration to remove water and impurities, and finally send it to each gas point cleanly with food-grade stainless steel pipes. As long as there is a problem in one link in the whole chain, the air quality will be discounted, so every link cannot be saved.
Chip packaging plants cannot do without air compressors, and water-lubricated oil-free air compressors have become a common choice in such factories because of their clean air, stable operation and worry-free maintenance.
Compressed air is widely used in industry, and it can be understood as a universal power source in the factory.
Semi-automatic bottle blowing machine, this kind of machine is small in size and low in output. It makes about 300 to 800 bottles per hour. It needs about 0.3 cubic meters of compressed air per minute. It is a relatively gas-saving type and is suitable for small-scale production or start-up scenes.
The hospital is a place with very high requirements for air quality. The use of compressed air in the hospital is much more extensive than most people think, and it runs through almost all aspects of diagnosis and treatment, surgery, nursing, and logistics.
Chlor-alkali chemical plant is through the electrolysis of salt water to produce chlorine, hydrogen and caustic soda factory, the use of compressed air throughout the production process is very much, can be said to be a source of power plant operation can not be separated.
The production of cigarette factory is mainly divided into three links: silk making, rolling and packaging, and almost every link is inseparable from compressed air. The wire injection machine needs compressed air to transport tobacco, the cigarette machine, the connecting machine and the packaging machine need compressed air to drive each action, and the wire making equipment and dust removal equipment also rely on compressed air to operate.
