2026-05-26Views：
Cigarette factory of course to use air compressor equipment, and the amount is very large. It can be said that in addition to electricity, compressed air is the second power source of the cigarette factory.
The production of cigarette factory is mainly divided into three links: silk making, rolling and packaging, and almost every link is inseparable from compressed air. The wire injection machine needs compressed air to transport tobacco, the cigarette machine, the connecting machine and the packaging machine need compressed air to drive each action, and the wire making equipment and dust removal equipment also rely on compressed air to operate. In addition, the production line of the cylinder, instrument control system, equipment purging and cleaning and other occasions, the same need to work with compressed air.
There is a key problem, that is, the cleanliness of compressed air. In some process links in cigarette factories, compressed air is directly in contact with tobacco raw materials. If the air is mixed with oil or moisture, it will affect the burning speed, aroma, strength, irritation and taste of tobacco. Therefore, direct contact with the gas point of the product requires very high air quality, and there can be no oil or water. However, occasions such as cylinder action and equipment purging that do not directly contact products require relatively loose requirements.
The water-lubricated air compressor can participate in the work well in the air supply system of the cigarette factory. This air compressor does not use lubricating oil, but uses water to complete lubrication and sealing, so there is no oil mist in the air produced. This is particularly appropriate for cigarette factories, because direct contact with the tobacco gas link is most afraid of oil pollution. When the water-lubricated air compressor is working, the water forms a layer of water film inside the machine, separating the moving parts, which not only reduces friction and wear, but also takes away the heat generated by compression. Although the air will bring some moisture, but as long as the back with drying equipment to remove the moisture, you can get clean and pure compressed air.
In the whole air supply scheme, the water lubricated air compressor is generally used together with drying equipment and filtering equipment, and is adjusted according to the needs of different air consumption links, so that higher quality air is used for the links directly contacting tobacco, and sufficient air is used for purging and cleaning such links, which not only ensures the quality of cigarettes, but also does not cause energy waste.
The frequency conversion and power frequency selection of the screw air compressor is actually a bit like choosing a household item that is both practical and meets personal needs. Both have their own advantages, there is no absolute "good" or "bad", the key is also
Q: Does the air compressor tank count as a pressure vessel? A: Yes, the air compressor tank is a pressure vessel.
There is a close relationship between the air production and the pressure of the air compressor. The following is a detailed explanation of this relationship: Basic concept: Air production: usually refers to the volume of compressed air produced by the air compressor per unit time. Pressure: indicates air compressor
In today's industrial production, air compressor as an important power equipment, its performance and efficiency is directly related to the production costs and benefits of enterprises. Especially in the application of frequency conversion technology, a high-quality frequency conversion air compressor can save energy and reduce consumption for enterprises, improve production
Natural gas compressor belongs to special equipment. Special equipment refers to the equipment involving life safety and high risk, including boilers, pressure vessels, pressure pipes, elevators, lifting machinery, passenger ropeways, large amusement facilities and special motor vehicles in the field (factory)
Yes, the dryer must be started synchronously when the air compressor is started. This operation specification is based on the following core reasons and operation basis: 1. necessity: the essential problem of water content in compressed air After the air is compressed, the concentration of water molecules per unit volume rises sharply, forming saturated water vapor
Whether the air compressor is explosion-proof electrical equipment depends on its design and working environment. The following is a detailed answer: the definition of 1. explosion-proof electrical equipment explosion-proof electrical equipment refers to the design of explosive environment (such as flammable gas, steam, dust and other places) electrical equipment
The frequency of water discharged from the air compressor tank depends on a variety of factors, including the frequency of use, the volume of the tank, the humidity of the production environment, and the industrial gas consumption of the factory. The following is a detailed analysis of this problem: 1. general principles Generally, air compressor gas tank
An air compressor with an oil content of less than 0.01 mg per cubic meter can be called an oil-free air compressor. In other words, this value is 0.01ppm, that is, 0.01 parts per million, which can be said to be almost negligible.
Air compressor safety protection measures mainly include the following aspects: 1. the safe use of compressed air before use inspection: before the use of compressed air, you must check whether the hose and joint is correctly connected, whether the air pipe is damaged, if there is damage should be repaired immediately or
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
