Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The oil content of compressed air is usually expressed in ppm (parts per million) and milligrams per cubic meter (mg/m & sup3;), both of which are used to measure the degree of oil pollution in the air. ppm is a unit of volume concentration, which refers to the ratio of oil volume to total air volume per million;
The oil content requirements of the gas system for pharmaceutical production and the solution of granklin air compressor Pharmaceutical production requires extremely strict cleanliness of compressed air, of which oil content is one of the core indicators. Granklin air compressor through water lubricated screw technology with no oil pressure
Air compressor: the core power source in general industrial equipment-analysis of granklin air compressor industry adaptability air compressor (air compressor) as the basic equipment in the industrial field, because of its widely used in manufacturing, energy, medical, food and other
The quality requirements of compressed air in the biopharmaceutical industry and the solution of granklin air compressor The biopharmaceutical industry has extremely strict quality requirements for compressed air, and its standards are directly related to the safety, effectiveness and compliance of pharmaceutical production. granklin air compression
Is water needed in the air compression system? -- Analysis of the technical innovation of Grantklin water-lubricated air compressor In the traditional air compression system, water usually does not exist as the core functional medium, and its role may be limited to the post-processing link (such as cooling and drying). But...
Pneumatic system on the quality of compressed air requirements mainly around the cleanliness, dryness and pressure stability, these indicators directly affect the system operating efficiency, component life and production safety. Granklin water lubricated single screw air compressor through oil-free compression design
The selection of compressed air pipe materials should be combined with the use environment, process requirements and long-term cost comprehensive evaluation. Carbon steel and stainless steel have their own applicable scenarios: 1. Characteristics and applicable scenarios of carbon steel pipes
Carbon steel pipes with high strength and low cost, suitable for dry or low corrosive environments
The "kilogram" mentioned in the air compressor parameters is a popular expression of the pressure unit, which usually refers to the pressure of the compressed air. In the industrial field, 1 "kg" is approximately equal to 0.1 megapascals (MPa), which is used to measure the pressure strength of the output airflow of the air compressor
After the pressure of compressed air is reduced from 0.8MPa to 0.5MPa, whether the actual flow rate is affected shall be analyzed in combination with specific scenes: 1. The relationship between theoretical flow rate and pressure
At constant temperature, the gas volume flow is inversely proportional to the pressure (following Boyle's law). If the pressure drops from 0.8MPa to 0.
The daily working time of the air compressor varies with production requirements, equipment types and process arrangements, and can usually be divided into the following three types of scenarios: 1. Basic production scenarios (8-12 hours/day)
In the production line with stable gas consumption such as conventional product processing and packaging, the air compressor runs daily.
