2026-04-15Views：
Is Water Needed in Air Compression System? -- Analysis of the Technological Innovation of Granklin Water Lubricated Air Compressor
in traditional air compression systems, water usually does not exist as a core functional medium, and its role may be limited to post-processing links (such as cooling and drying). But Grantklin air compressor through water Lubricated Screw Technology the introduction of water into the core link of the compression process has achieved a breakthrough alternative to the traditional lubrication method.
ordinary air compressor to air as the compression object, water is not a necessary component. Some systems may use water to assist cooling or dehumidification in the post-processing stage (such as a cold dryer), but the compression process itself relies on lubricating oil to complete sealing, cooling and component lubrication, and is not directly related to water.
granklin air compressor adopts single screw + star wheel structure, through the water medium to achieve three key functions:
water lubrication technology makes the oil content of compressed air close to zero, which is suitable for scenarios with strict air quality requirements:
after the cancellation of the oil system, the wear rate of equipment components is significantly reduced, and the maintenance frequency and cost are reduced by about 30%. Combined with the intelligent control system to monitor the running status in real time, the need for manual intervention is further reduced.
as a natural medium, water reduces the use and disposal of chemicals after replacing lubricating oil. At the same time, the optimized compression efficiency can reduce energy consumption and help enterprises achieve energy saving and emission reduction targets.
granklin Air Compressor Passed single screw + star wheel structure and water medium lubrication technology, the water from the "auxiliary role" to the "core function carrier", in the oil-free clean, low maintenance costs, environmental protection and energy saving to achieve a breakthrough. This innovation not only meets the needs of medical, food, electronics and other industries for high clean air sources, but also provides a more reliable and economical solution for the development of compressed air systems.
The choice of water lubrication technology is to choose the adherence to product quality, the pursuit of operational efficiency, and the commitment to green production.
Remember the node of 500 hour, do it when you arrive, don't delay. The water-lubricated air compressor has less work to change oil and filter elements, but the waterway inspection cannot be lazy.
Whether the screw air compressor is a special equipment depends on the relevant regulations and standards of different countries and regions. In China, screw air compressor is listed as one of the special equipment. This is because the screw air compressor needs to compress the gas during operation.
In the semiconductor manufacturing process, compressed air plays a vital role, mainly due to the following reasons: Process control: Semiconductor production involves many precise process steps, such as lithography, etching, thin film deposition, etc. In these steps, compressed air is commonly used.
The technical application specification of oil-free air in the air separation industry As the core field of industrial gas supply, the air separation industry has strict requirements on the quality of compressed air. Oil-free air technology provides a stable operation of air separation plants by eliminating oil contamination in compressed air.
I believe that many customers who buy oil-free air compressors or micro-oil air compressors are not very clear. In fact, this question cannot be answered positively. In fact, both air compressors have advantages.
1. Before the air compressor runs every day or every time: (1) drain the oil and gas barrel; (2) check the oil level; (3) prepare peripheral equipment, such as water and electricity, open the compressor outlet valve, etc. 2. The air compressor runs for 500 hours: (1) Remove and clean the air filter element,
The main differences between air compressor frequency conversion and power frequency are reflected in the operating frequency, energy efficiency performance, starting characteristics, noise level, pressure stability, maintenance cost and applicable scenarios. The following is a detailed explanation of these differences: 1. operating frequency variable frequency
The screw rotation speed of screw air compressor is one of the key parameters affecting the performance of the equipment, and its design should consider the factors such as air supply efficiency, energy consumption control and equipment life. Granklin water-lubricated single screw air compressors have been technologically innovative in screw rotation.
The air compressor driven by permanent magnet variable frequency has a series of remarkable characteristics, as follows: stable air pressure: due to the stepless speed regulation characteristics of the frequency converter, the permanent magnet variable frequency air compressor can start slowly, and can quickly adjust and respond to large gas fluctuations
Compressed air plays a vital role in the operating room. It is not only the power source for the normal operation of many medical equipment, but also directly related to the health and safety issues during the operation. Therefore, hospitals have extremely high requirements for the quality of compressed air. On
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
