2026-04-09Views：
Q: Equipment gas consumption and air compressor selection?
Answer:
according to the equipment gas selection air compressor first consider two points:
1. For the problem of pressure, you need to understand the normal pressure range of all equipment, take the maximum and minimum values, and then increase the pressure by 1kg according to the maximum value to select the air compressor.
(Considering the pressure loss and pipeline pressure loss of the air compressor post-treatment equipment)
2. For the problem of gas consumption, understand the rated gas consumption Q of all gas-consuming equipment, accumulate, understand the simultaneous startup rate of the whole process A%, and then use Q * a% to obtain the demand Q1, then consider the backup machine of the air compressor and the problem of increasing gas consumption in the later period, and increase the allowance by 10% to 20%, which is the exhaust volume of the air compressor to be deployed.
Recommendation: Open two and prepare one
if the required gas volume is 75 cubic meters, then buy three 40 cubic meters of air compressors and open two for one.
If the required gas volume is 375 cubic meters, then buy 6 air compressors of 100 cubic meters and open 4 for 2.
If you only need 5 cubic meters of air and supply air for up to 8 hours a day, you can buy a 6-7 cubic meter.
The air volume of the air compressor is calculated in cubic meters per minute (m & sup3;/min).
Therefore, you can calculate the amount of gas used per minute according to the amount of gas used.
Selection Guide for Air Compressor Selection of Working Pressure (Exhaust Pressure) When the user is preparing to purchase an air compressor, first determine the working pressure required at the air end, add a margin of 1-2 bar, and then select the pressure of the air compressor (consider the pressure loss of the pipeline distance from the installation site of the air compressor to the actual air end, and appropriately consider the pressure margin according to the distance between 1-2 bar).
The size of the pipeline diameter and the number of turning points are also factors that affect the pressure loss. The larger the pipeline diameter and the fewer turning points, the smaller the pressure loss; on the contrary, the greater the pressure loss.
Need to purchase air compressor can contact us granklin group, we have professional sales for you to match the right oil-free air compressor.
The maximum setting pressure of the air compressor usually depends on the type and specification of the air compressor and the specific application requirements. Generally speaking, the maximum pressure of the air compressor is set with a certain safety range to ensure the normal operation and operation safety of the equipment. Conventional air compressor
The maintenance required for 2000 hours of operation of the air compressor is a comprehensive task designed to ensure the normal operation of the equipment, extend the service life and improve work efficiency. The following is a detailed summary of the maintenance work that needs to be carried out after the air compressor runs for 2000 hours: 1. routine
The oil level classification standard of air compressor is mainly defined according to the oil content in compressed air. The following is a detailed summary of the oil content classification standards for air compressors: 1. to the international standard ISO 8573-1: oil content ≤ 0.01 mg/m & sup
To distinguish whether the air compressor is a variable frequency type, it can be observed and judged from the following aspects: Motor type: The variable frequency air compressor is usually equipped with a variable frequency motor. This motor may be similar in appearance to an ordinary motor, but its internal structure and control methods are
The choice of air compressor, whether it is refueling (oil lubrication) or not (oil-free), mainly depends on the specific application requirements and the use of the environment. Refueling air compressors usually have a longer service life and higher energy efficiency, because lubricating oil can effectively reduce the engine.
In the food and beverage industry, the water-lubricated air compressor of Shanghai Grankering Group is widely used and outstanding due to its oil-free, energy-saving and environmental protection characteristics. The following is a detailed introduction to the product, combined with a comparative analysis of industry applications: Granklin Water Run
Granklin oil-free screw water-lubricated air compressor: the "environmental protection guard" of air purification In the pursuit of efficient and environmentally friendly industrial production, Granklin oil-free screw water-lubricated air compressor has become the first choice for many enterprises with its unique technical advantages. This is empty.
The price of oil-free air compressors varies depending on factors such as brand, model, power and performance. The following is some information about the price of oil-free air compressors: There are different brands and models of oil-free air compressors on the market, with a wide range of prices. Some small, portable
The air compressor system provides gas guarantee for enterprise production. Industrial electricity is mainly 380V. If the air compressor room is not properly managed, it may bring fire, pneumatic equipment operation danger, electric shock and other environmental hazards. Once down, it will cause the risk of shutdown, so
Confirm whether the air-cooled screw unit is frequency conversion, you can use the following methods: check the model identification: the model of the frequency conversion air-cooled screw unit usually contains the words "frequency conversion" or "BP. Observe external machine: frequency conversion air
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
