Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Screw air compressor safety operation procedures and precautions: First, the operator must be familiar with the air compressor structure, performance, working principle, operating procedures and other precautions. Second, operators must undergo technical training and safety training, and can only take up their posts after passing the examination. No
In recent years, the food industry has developed rapidly, and the automation level of food factory equipment has also been continuously improved. Machine, electricity, gas and other integrated technologies are increasingly applied to the food industry, oil-free screw air compressor is one of them. Due to the special characteristics of the food and beverage industry
Oil-free is good, and it is clearly arranged for you from the price. Oil-free is several times the price of oil (not the kind of small piston air compressor). The compressed air produced by the oil air compressor is with a small amount of oil, and it must be filtered, and it is still endless.
Air compressor pumping slow repair method 1, check whether the air filter is blocked, in the process of operation need to clean the air filter regularly, the use of bad environment to properly shorten the replacement period. 2. Check the pressure sensor of the air compressor, you can put the back of the air storage tank
The main uses of the 1. power industry: compressed air system for instruments, compressed air system for ash removal, compressed air system for miscellaneous factories, water treatment including boiler make-up water treatment and industrial wastewater treatment system, and equipment power pressure in hydropower stations.
If you need to purchase air-cooled screw air compressors, you can look at the water-lubricated air compressors produced by "Shanghai granklin group" and accept customized water-cooled and air-cooled air-cooled air compressors. Fully domestic screw air compressor equipment, in the order cycle compared to foreign countries.
Due to the large and small parts of the air compressor, the common ones are: air filter, oil filter, oil core, lubricating oil, belt, solenoid valve, etc.; air compressor maintenance is divided into: overhaul and minor repair. Under normal circumstances, the overhaul of the air compressor is basically more serious
Air compressors with oil and without oil are not absolutely good or bad. Their use occasions are different from those suitable for working conditions. If they are used for purging, machining, manufacturing and power, it is OK to choose air compressors with oil and slight oil, but in some occasions, oil-free air must be used.
Good or bad depends on the occasion of use and the actual working conditions. In some cases, such as food, medicine, precision instruments and other industries, it is necessary to use a full oil-free air compressor. But the oil-free air compressor is much more expensive and the maintenance cost is higher. Such
Vibration failure phenomenon of air compressor The vibration generated during the operation of screw air compressor is very small, and the vibration will increase or exceed the standard under some special circumstances. Cause analysis of air compressor vibration 1. Large deviation of wheel center 2. Loose bottom angle such as bolts
