2026-04-09Views：
Air compressor pumping slow repair method
1. Check whether the air filter is blocked. The air filter should be cleaned regularly during operation. The replacement period should be shortened appropriately in places with poor use environment.
2. Check the pressure sensor of the air compressor. You can close the valve behind the air storage tank or pump air in the shutdown state to see if it is normally loaded and unloaded within the set pressure.
3. The intake and exhaust valves fail and cannot be fully opened. Check whether the intake and exhaust valves are fully open and need to be adjusted.
An air compressor is a device used to compress gas. Air compressors are similar in construction to water pumps. Most air compressors are reciprocating piston type, rotating blade or rotating screw. Centrifugal compressors are very large applications. Air compressor is one of the main mechanical power equipment of many enterprises, and it is very necessary to maintain the safe operation of air compressor. Strict implementation of the air compressor operating procedures, not only helps to extend the service life of the air compressor, but also ensures the safety of the air compressor operator.
GMP (Good Manufacturing Practice) has strict requirements on the quality of clean compressed air to ensure that it will not introduce pollution in the pharmaceutical production process and ensure product quality and safety. Specific standards can be summarized as follows: microbial control: compressed air does not
Air compressor, or air compressor for short, is an important equipment widely used in various industrial and commercial scenarios. Its main uses include but are not limited to the following aspects: Provide power source: air compressor is a pneumatic tool, pneumatic equipment and automated production line
Granklin water-lubricated single-screw air compressor: innovator of oil-free compression technology Granklin water-lubricated single-screw air compressor adopts a compression structure in which a single screw engages with a star wheel plate, and uses water instead of traditional lubricating oil to cool and seal the rotor. This design from the root of Du
There are obvious differences between oil-free air compressors and micro-oil air compressors in many aspects: lubrication method: oil-free air compressors do not use lubricating oil at all during the compression process, but use other lubrication methods, such as water lubrication. The micro-oil air compressor will be used in the compression process
The specific power of the air compressor, also known as the gas production per unit energy consumption, refers to the ratio of the electric energy (or other forms of energy) consumed by the air compressor per unit time to the amount of compressed air produced. It reflects the energy efficiency level of the air compressor and is a measure of the performance and economy of the air compressor.
Screw air compressors are designed to operate continuously to meet the continuous demand for compressed air in industrial applications. However, even if the screw air compressor can run continuously, the following points need to be paid attention to to ensure its normal operation and prolong its service life:
The air microbiological standards of food factories are very important to ensure food safety. The following are detailed from four aspects: monitoring indicators, limit requirements, detection methods and prevention and control measures: 1. core monitoring indicators Floating bacteria (Airborne Microbes) Definition: suspended in the air
The screw air compressor itself is not classified as a container, but as a type of compressor. A container usually refers to a closed device used to store a gas, liquid or solid, such as a gas storage tank, a liquid storage tank, etc. Screw air compressor is a kind of screw rotation
The amount of water in the air, expressed in parts per million (ppm), is not a fixed value, but is affected by a variety of factors, including temperature, humidity, geographic location and climatic conditions. In the air at normal temperature and pressure, the moisture content
Oil-free air compressors can be divided into five categories according to lubrication methods and working principles, and their technical characteristics and application scenarios are significantly different. The following is the specific classification and analysis: 1. water lubricated oil-free air compressor principle: pure water as the lubricating medium, through the screw and star wheel rotating pressure
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
