Screw machine vibration big reason

Vibration failure phenomenon of air compressor

the vibration generated during the operation of the screw air compressor is very small, and the vibration will increase or exceed the standard under some special circumstances.

Cause Analysis of Vibration of Air Compressor

1. Large deviation of wheel center

2. The bottom angle is loose if the bolt is not tight

3. The rotor clearance does not meet the standard

4. Insufficient supply of lubricating oil for air compressor

5. The air compressor oil filter has not been replaced for a long time or the working environment is poor so that it is blocked.

6. Bearing wear caused by insufficient lubrication

vibration Elimination Method of Air Compressor

1. Find a professional air compressor maintenance engineer to readjust

2. Adjust and fasten the anchor bolts

3. Check whether the rotor is deformed

4. Whether the oil supply regulating valve is fully opened and the lubricating oil quantity is increased

5, replace the new oil filter or cleaning

6. Bearing replacement