Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The maintenance of the screw air compressor is introduced in detail today. The maintenance of the screw air compressor is divided into 4 stages, namely: daily maintenance, monthly maintenance, quarterly maintenance, and annual maintenance. 1. Daily maintenance check the oil level, check the air filter element and coolant fluid
Air compressor is not special equipment. However, as long as the working pressure of the gas storage tank and the connected pipeline is greater than or equal to 0.1Mpa, the volume and the pipe diameter are greater than or equal to 25mm, it belongs to special equipment. Special equipment refers to the boiler, pressure capacity involving life safety and greater risk.
Literally, oil-free air compressors and oil-free air compressors are easy to distinguish. However, in terms of their power generation equipment and energy efficiency, they are completely different. What is the main difference between oil-free compressor and oil-air compressor energy
What are the application scenarios of air compressor? Air compressor is the core equipment of pneumatic system, it is the device that converts mechanical energy into gas pressure, and it is the pressure generating device of compressed air. The scope of application is mainly: general air compressor use industry: 1
With the rapid development of industry and the gradual improvement of people's living standards, the requirements of the society for the required products have been greatly improved. At the same time, the upgrading of the air compression system has promoted the oil content, water content, and decibels of the compressed gas. The requirements are getting higher and higher. Air compressor plant
The screw air compressor can be operated for 24 hours. The air pressure is not enough to load automatically, the air pressure is enough to unload automatically, and the idle time exceeds the rated time to stop automatically, thus realizing unattended for 24 hours. Air compressor can insist on continuous work.
Generally, the vibration value and vibration speed of the motor will be measured when the motor is empty. The general vibration range of the motor is within 3 channels (that is, less than or equal to 0.03). 75kw air compressor standard vibration value: vibration intensity standard ISO2372(10-1K
Screw air compressor as a wide range of general machinery, is used in all aspects of production. According to the different lubrication methods, it can be divided into oil-free air compressor and oil-free air compressor. What is the difference between the two? 1. the oil content is different, the air compressor has
At present, most domestic cities use centralized landfill or incineration for garbage disposal. Compared with landfill methods that are easy to pollute the soil, waste incineration treatment is more conducive to reducing the volume of waste and eliminating various pathogens. Moreover, with the sustainable construction of society
The air compressor, also known as the air compressor, is the core equipment in the pneumatic system. It provides air source power. It converts the mechanical energy of the electric motor or diesel engine into the pressure energy of the gas. It is a pressure generating device for compressed air. The principle of air compressor is easy to understand
