Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
The reasonable range of the vibration value of the air compressor can be different according to different standards and requirements. Generally speaking, when the motor is no-load, the vibration value and vibration speed of the motor will be measured, and the vibration value of the motor should usually be less than 0.03. For 75kw air compressor, its standard
The time that the air compressor can run for a long time depends on many factors, including the type of air compressor, the working environment, the load situation, and the maintenance. Generally speaking, the screw air compressor can run for a long time after replacing the three filters, or even
The reasons for the automatic shutdown of the air compressor may be as follows: The exhaust temperature is too high: This is the most common fault of the air compressor and may cause automatic shutdown. There are many reasons for the high exhaust temperature, including the blockage of the cooler, the abnormal operation of the cooling fan, the temperature transmission
The service life of the gas tank is determined according to national standards and relevant regulations, and is affected by many factors, such as the type of gas tank, working environment, and use conditions. In general, common atmospheric gas storage tanks (I. e. industrial gas storage tanks)
Screw air compressor host imbalance may be caused by a variety of reasons, the following are some possible solutions: check the power supply, wiring port is loose, whether the wire is tight. If the wiring port is loose or the wire is not compressed, it will cause current failure, which will cause
Insufficient air supply of air compressor may be caused by a variety of reasons, the following are some possible reasons: maintenance is not timely: when the operating environment of the unit is not ideal, check whether the air filter and oil filter are blocked. If the exhaust volume decreases due to clogging of the air filter and oil filter, only
The safety operation procedures of screw air compressor mainly include the following contents: preparation before starting the 1.: the operator must be familiar with the structure, performance, working principle, operating procedures and matters needing attention of the air compressor, and undergo technical training and safety training.
Scroll air compressor and screw air compressor are two different kinds of compressed air generating equipment, which have significant differences in structure, working principle and application. Scroll air compressor, also known as vortex air compressor, adopts scroll design, two of which are scroll
In the food packaging industry, it is very important to choose a suitable air compressor, because the quality of compressed air directly affects the hygiene and safety of food. As a professional air compressor manufacturer, Shanghai Granklin Group provides a variety of air compressor products.
The working principle of the intake valve of the screw air compressor is mainly related to the control of the air entering the compression chamber. The following is a detailed explanation of its working principle: The position and structure of the intake valve: The intake valve of the screw air compressor is usually located at the intake port of the compressor
