Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Compressed air quality standards for medical enterprises cover cleanliness, oil content, microorganisms, stability, temperature and humidity, among which oil-free water lubricated air compressors have become the preferred equipment to meet the high standards of the medical industry because they can provide more pure compressed air.
The air compressor in the sewage treatment plant is the key equipment to ensure the smooth operation of the sewage treatment process. It mainly drives a variety of core process links by providing compressed air. Among them, the air compressor using oil-free water lubrication technology has more advantages in the application of sewage treatment plant due to its environmental protection characteristics.
The requirements for the dew point of compressed air in battery manufacturing are usually very strict, generally below -40 ℃, and some key processes even require -50 ℃ to -60 ℃. This requirement stems from the extremely high standards of air quality in battery production-any trace of moisture may cause moisture in battery materials and deterioration of electrolyte, which in turn leads to battery performance degradation, shortened life, and even safety hazards.
Each gas-consuming equipment (such as pneumatic tools, spraying equipment, packaging machinery, etc.) will be marked with a rated gas consumption (in cubic meters per minute or liters per minute). Add up the gas consumption of all equipment running at the same time to obtain the theoretical total gas consumption.
In the semiconductor industry, the air compressor of Shanghai Granklin Group is used, and the oil-free water lubrication technology is adopted. This type of air compressor replaces traditional lubricating oil through water lubrication, eliminating the risk of oil pollution from the source, ensuring the absolute purity of compressed air, and fully meeting the high standards of air quality in semiconductor production.
In semiconductor manufacturing, the cleanliness of compressed air directly determines the yield and product reliability of chip production. Its core requirements can be summarized as follows, which are explained in combination with the technical characteristics of water-lubricated air compressors: 1. cleanliness core requirements particulate matter control
Medical air compressor is the key equipment to ensure the operation of equipment and patient safety in medical scenarios. Its core function is to provide clean and stable air support for various medical operations. The specific uses are as follows: 1. Drive the operation of medical equipment Respiratory support system: Ventilator
In the field of permanent magnet variable frequency air compressor, some manufacturers have integrated oil-free lubrication technology into product design through technological innovation, forming unique technical advantages. This kind of equipment uses water as the lubricating medium, through the circulating water film to achieve the sealing and cooling of the compression chamber, from the source to avoid.
The compressed air in contact with traditional Chinese medicine shall meet the core standards of oil-free, dry, clean and sterile. The specific requirements are as follows: 1. oil-free requirements Oil control: compressed air shall not contain impurities such as lubricating oil to avoid polluting traditional Chinese medicine. Generally, the oil content is extremely low, such as less than 0
When starting the compressed air system, the correct operating sequence and equipment characteristics need to be understood in conjunction with the working principle of the oil-free water-lubricated air compressor (or water-lubricated air compressor). The following are step-by-step instructions: 1. Start sequence principle
The air compressor should be started first, and then started after its operation is stable.
