2026-04-27Views：
The requirements for the dew point of compressed air in battery manufacturing are usually very strict, generally below -40 ℃, and some key processes even require -50 ℃ to -60 ℃.. This requirement stems from the extremely high standards of air quality in battery production-any trace of moisture may cause moisture in battery materials and deterioration of electrolyte, which in turn leads to battery performance degradation, shortened life, and even safety hazards.
In battery manufacturing, the dew point control of compressed air is directly related to the humidity management of the production environment. The lower the dew point, the lower the moisture content in the air, and the more it can meet the demand for a dry environment for battery production. For example, in the pole piece drying, liquid injection, sealing and other key processes, the dew point of compressed air should be strictly controlled below -40 ℃ to ensure that the pole piece, electrolyte and other core materials are not affected by moisture.
Water-lubricated air compressor plays an important role in battery manufacturing. It uses water lubrication technology to replace traditional lubricants, eliminating the risk of oil pollution from the source and ensuring the purity of compressed air. At the same time, the water-lubricated air compressor needs to be equipped with efficient drying equipment to further reduce the dew point of compressed air and meet the demand for dry air in battery production.
Specifically, water-lubricated air compressors help battery manufacturing:
Trouble phenomenon: When the engine is running and the air compressor is inflating the air tank, the air pressure indicator indicates that the air pressure cannot reach the starting pressure value. Causes of failure: 1. The barometer fails. 2. The transmission belt between the air compressor and the engine is too loose and slips, or
The production of food-grade chemical raw materials requires extremely strict compressed air to ensure the safety and quality of the final product. These requirements usually follow the relevant international or domestic standards, and pay attention to the purity of compressed air, water content, oil content, microbial content.
The screw compressor does not work all the time. Its working method is usually adjusted according to actual needs. When the pressure in the air tank reaches the preset upper limit, the air compressor will automatically stop; and when the pressure is reduced to the preset lower limit, the air compressor will
If you need to purchase air-cooled screw air compressors, you can look at the water-lubricated air compressors produced by "Shanghai granklin group" and accept customized water-cooled and air-cooled air-cooled air compressors. Fully domestic screw air compressor equipment, in the order cycle compared to foreign countries.
Chip processing has extremely strict requirements for compressed air, which are mainly reflected in the following aspects: Dryness: The compressed air must be very dry to avoid condensation in the air supply system. Moisture may cause equipment corrosion and product quality degradation
The water produced by the air compressor can be effectively removed by the following methods: cold and dry water removal: principle: use compressed air to enter the cooler, reduce the surface temperature to below the dew point, and condense the water vapor into water droplets. Features: This method is simple and
Whether food packaging factories can use micro-oil air compressors should be judged comprehensively according to specific scenarios and risk control measures. The core principle is "to avoid oil contamination of food". It can be used with caution on the premise of meeting cleaning requirements, but oil-free air compressors are more recommended. The following
Q: Oil-free air compressor with water lubrication can really do oil-free? Answer: Water-lubricated oil-free air compressor can do oil-free. The water-lubricated oil-free air compressor adopts single-screw technology to replace oil with water to achieve lubrication, cooling, sealing, noise reduction and other effects, providing high quality
Many people think that oil-free air compressors are truly oil-free, but this is not the case. Usually we think that the oil content of the oil-free air compressor is 0.01ppm, while the oil content of the screw machine we usually use is about 3ppm, which we will recognize above this standard.
The frequency of screw air compressor refueling depends on a number of factors, including equipment model, conditions of use, type of lubricant, and manufacturer's recommendations. The following are some general guidelines for screw air compressor refueling cycles: 1. regular refueling cycles New
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
