2026-07-15Views：
1. core advantages
expansion and capacity increase: The total gas storage capacity is the sum of all gas tank volumes, which can greatly increase the gas storage capacity.
Voltage stabilization and frequency reduction: effectively buffer the fluctuation of gas consumption, reduce the frequency of air compressor loading and unloading, and extend the life of equipment.
Redundancy and reliability: when a single gas tank fails, the remaining gas tanks can still maintain gas supply without interrupting production.
Large flow adaptation: multiple tanks can supply gas at the same time, which can meet the demand of instantaneous large flow gas scene.
2. Installation Specification
pipeline design: the inlet and outlet of each gas tank are connected by three-way, sharing the same inlet and outlet channel.
Pipe diameter requirements: parallel pipe diameter to match the total flow, reduce the number of elbows, to avoid unnecessary pressure drop.
Interface requirements: all gas tanks follow the interface principle of "low inlet and high outlet" to ensure smooth drainage.
Spacing requirements: the air tank and the air compressor to maintain a distance of more than 2 meters, when conditions permit can be set at 12~15 meters.
Key points of 3. operation and maintenance
verification of accessories: the safety valve and pressure gauge of each gas tank shall be verified regularly to ensure safety and compliance.
Separate blowdown: the blowdown valve of each gas tank is set independently to complete the blowdown operation separately on a regular basis.
Shutdown maintenance: when repairing a single gas tank, close the corresponding valve for isolation, and the other gas tanks operate normally.
Safe operation: stop the machine and release the pressure before maintenance, and it is strictly prohibited to carry out maintenance operations under pressure.
4. applicable scenarios
industrial production, construction sites and other gas points, gas fluctuations in the scene.
The original single gas storage tank volume is insufficient, do not want to stop production to replace the expansion and transformation of the large tank scene.
Production conditions that require high continuity of gas supply and require redundant backup.
In the semiconductor industry, the quality requirements of compressed air are extremely strict, especially for the control of dust content. Because the manufacturing process of semiconductor products has extremely high requirements for environmental cleanliness, any tiny dust particles may affect the performance and stability of the chip.
The oil-free air compressor will automatically stop under a certain pressure. The main reasons are as follows: Overheat protection: The internal temperature of the oil-free air compressor will rise after working for a long time. For the safety and stability of the equipment, most oil-free air compressors have been set up.
Air compressor permanent magnet refers to a motor that uses permanent magnet materials to generate a magnetic field, which is used to drive the rotor of the air compressor to run and achieve the purpose of compressing air. Compared with the traditional AC induction motor, permanent magnet motor has the advantages of high efficiency, miniaturization and energy saving. This empty.
Q: water lubrication oil free screw variable frequency air compressor which is good? A: Shanghai granklin (group) co., ltd. Shanghai Granklin (Group) Co., Ltd. is located in Shanghai Baoshan District Robot Industrial Park, covering an area of 60 acres. It is a company with independent intellectual property rights.
There are different views on whether the compressed air dryer belongs to special equipment. Some people think that the compressed air dryer is a kind of equipment widely used in air compression system to remove moisture and moisture in the air, so as to ensure the normal operation of the system.
In Jiangsu, many enterprises are faced with the challenge of choosing efficient and reliable oil-free air compressors. Among the many brands, Shanghai Grankering Group has become a large number of enterprises with its excellent technical strength and product quality, especially its water-lubricated oil-free air compressor products.
Oil-free air compressors play an important role in the semiconductor industry. The following is a brief description of the role of oil-free air compressors in the semiconductor industry: Provide pure air: The semiconductor manufacturing process requires extremely high air quality, any tiny pollution
Oil-free air compressor common fault maintenance: 1, oil-free air compressor intermittent work, insufficient gas supply. The reason for this failure is: insufficient voltage. Starting from the buzzing sound, if the current running current is greater than 5: 00 a.m. (ordinary 520 watts and 840 watts without oil or oil
The air compressor can be fitted with an automatic drain valve. The automatic drain valve plays a vital role in the air compressor system, which can effectively solve the problem of moisture accumulation in the compressed air. Functions and Advantages of Automatic Drain Valve Automatic drain: Automatic drain valve can check in real time
Medical compressed air systems play a vital role in the hospital environment and are mainly used in the following areas: Respiratory therapy: In the intensive care unit (ICU) and emergency room (ER), medical compressed air is commonly used in ventilators and other respiratory assistance equipment to provide
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
