2026-04-09Views：
Wafers have strict requirements for compressed air, because any tiny oil, moisture or solid particles can have a significant impact on the wafer production process, reduce product quality, and even cause equipment damage. Here are some of the main requirements for compressed air in a fab:
oil-free: Wafer production requires completely oil-free compressed air, because even a small amount of oil can contaminate the wafer surface and affect the accuracy and integrity of the circuit pattern.
Dry: Compressed air must be dry enough to prevent condensation of moisture in piping or equipment. Moisture can cause corrosion, affect the operating accuracy and life of the equipment, and may also contaminate the wafer.
Cleaning: compressed air should not contain solid particles, such as dust, metal chips, etc. These particles can cause scratches or contamination on the wafer surface, seriously affecting product quality.
Stability: The pressure and flow of compressed air must be stable to ensure the continuity and consistency of the production process.
shanghai granklin group product description:
water-lubricated air compressors: Although water-lubricated air compressors perform well in some applications, they may not be the best choice for fabs, because even with water lubrication, it is necessary to ensure that the compressed air is absolutely oil-free.
Oil-free air compressor: The oil-free air compressor of Shanghai Grankering Group is specially designed to meet the requirements of high cleanliness. It adopts special sealing materials and structure to ensure that the compressed air is pure and oil-free. This air compressor is very suitable for fabs and other occasions that require high-quality compressed air.
Frequency conversion air compressor: Through intelligent frequency conversion technology, the frequency conversion air compressor of Shanghai Granklin Group can dynamically adjust the output pressure and flow according to the actual needs of the fab to achieve energy efficiency optimization and stable operation.
Screw air compressor: Screw air compressor is famous for its efficient and reliable performance. The screw air compressor of Shanghai Granklin Group adopts advanced screw design and manufacturing technology to ensure long-term stable operation and easy maintenance. For applications that require dry compressed air, it can be used with a cold dryer or a suction dryer.
Question: How does Shanghai Granklin Group ensure that oil-free air compressors meet the strict requirements of fabs?
Answer: Shanghai Grankering Group ensures that its oil-free air compressors meet the strict requirements of the fab through the following measures:
use special oil-free design and materials to eliminate the possibility of oil pollution at the source.
Strict production process control and quality testing to ensure that each oil-free air compressor meets high quality requirements.
Provide professional after-sales service and technical support, regularly check and maintain the equipment to ensure its long-term stable operation in an oil-free state.
Work closely with fabs to understand their specific needs and standards and tailor solutions to meet the most stringent requirements.
Compressed air ppm is a unit used to describe the content of trace substances (such as oil, moisture, etc.) in compressed air, specifically referring to the concentration of one part per million. In the field of compressed air, ppm is often used to express the oil content in compressed gas, that is, parts per million
There are significant differences between oil-injected air compressors and oil-free air compressors in terms of lubrication methods, compressed air quality, cost of use and application areas. Lubrication method: oil injection air compressor: This air compressor uses oil for lubrication. During the compression process, the oil
In the process of electroplating workshop, whether the air compressor needs to run all the time depends on the specific process requirements, equipment configuration and production mode. The following is a detailed analysis from three dimensions: technical principles, actual scenarios, and energy-saving optimization: 1. scenarios that require continuous operation
Water accumulation inside the air compressor is a common problem, which is mainly formed by the condensation of water vapor in the air during the compression process. If it is not handled in time, it will cause equipment corrosion, lubricating oil emulsification, pneumatic component damage and other problems. The following is a systematic solution, covering cause analysis, location
The maintenance cost of the screw air compressor is a bit complicated because it is affected by many factors. Generally speaking, the maintenance cost of air compressors of imported brands may be higher than that of domestic brands. After all, the price of accessories and maintenance time will be different.
Application Orientation Analysis of Air Compressor in Food Industry As a basic equipment in the industrial field, air compressor plays an important role in the food industry, but its attribute orientation needs to be combined with the comprehensive judgment of function and application scene: analysis of the function essence of 1. equipment Air compression
Cold dryer exhaust high temperature alarm may be caused by a variety of reasons, the following are some possible reasons and the corresponding solutions: equipment failure: condenser blockage or cleaning is not complete: this will cause the heat can not be normal, and then trigger the high temperature alarm. Should be fixed
In industrial compressed air system, air cleanliness is the core index to measure the performance of the system, and its numerical characterization is directly related to the stability of the production process and the reliability of product quality. After systematic combing of industry norms and
The pressure of the air compressor is usually determined according to the specific application requirements and will be affected by the use environment and equipment specifications. Generally speaking, the pressure of air compressor can be divided into the following ranges: low pressure air compressor: working pressure is usually between 0.7 and 1.2 M
Explosion-proof air compressor is really a magical device! It can be used in many industries. Imagine the coal mining industry, where the environment is dark and challenging, but the explosion-proof air compressor is like a brave explorer, providing safety for miners.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
