What is the pressure of the air compressor?

The pressure of the air compressor is usually determined according to the specific application requirements and will be affected by the use environment and equipment specifications. Generally speaking, the pressure of the air compressor can be divided into the following ranges:

low-pressure air compressors: The working pressure is usually between 0.7 and 1.2 MPa (megapascals), which is equivalent to 7 to 12 bar. This pressure range of air compressor is suitable for some occasions where the pressure requirement is not too high.

Medium pressure air compressor: The working pressure is usually between 1.2 and 3 MPa (megapascals), that is, 12 to 30 bar. This is the more common pressure range in industrial applications and can meet the needs of most pneumatic tools and equipment.

High pressure air compressor: the working pressure is usually more than 3 MPa (MPa), that is, more than 30 bar. Such high-pressure air compressors are usually used for specific industrial applications that require extremely high pressures, such as certain special processing processes or experiments.

In addition, there are some specific areas of air compressor pressure have specific requirements, such:

in the aerospace field, due to the very high requirements for components, higher air pressure may be required, and the pressure of the air compressor may exceed the range of general industrial applications.

In the field of medical and health, air compressors are mainly used for oxygen inhalation in wards, dental equipment, operating tables and other equipment. The output pressure range is relatively low, usually between 0.7 and 0.8 MPa(7 to 8 bar) to ensure medical gas Flow and purity requirements.

In general, the pressure range of air compressors is wide, and the appropriate pressure level should be selected according to specific application scenarios and needs. When choosing an air compressor, in addition to considering pressure requirements, it is also necessary to consider factors such as equipment type, specifications, process requirements, and energy efficiency.