2026-04-14Views：
The air blown by the air compressor is all water, which may be due to the following reasons:
Air humidity: the natural state of the air itself contains a certain amount of moisture. When this air is compressed, the water evaporates to form water vapor due to the temperature rise. Subsequently, during the discharge of the compressed air, as the temperature drops, the water vapor condenses into liquid water.
the compression process produces water. When the air compressor is working, the gas is compressed and releases a lot of heat, resulting in a very high temperature inside the compressor head. In this process, the moisture in the inhaled air forms water vapor and is discharged along with the compressed air.
Cooler Condensation: Air compressor units are usually equipped with air coolers to force the discharged compressed air to cool down. This cooling process causes water vapor to condense, thereby producing moisture.
Pipe and tank condensation When compressed air passes through pipes and tanks, because its temperature is usually higher than the temperature of these objects, it will cause the temperature to drop rapidly, liquefying water vapor and forming condensed water.
in order to solve the problem that the air blown by the air compressor is all water, the following measures can be taken:
Install the drain valve: install the drain valve at the lowest end of the air compressor cooler and the air storage tank, and open the drain valve regularly to drain the water.
Add drying equipment: add a cold dryer or dryer after the air compressor exhausts to remove moisture. When using the cold dryer, it is necessary to check regularly to ensure its drainage effect.
Control of ambient humidity: If possible, control the humidity of the environment where the air compressor is located to reduce the moisture content in the air.
Regular inspection and maintenance: Regular inspection and maintenance of the air compressor to ensure its normal operation, and timely discover and deal with any problems that may cause excessive moisture.
Compressed air has different requirements for cleanliness in different usage scenarios. Some places require almost no oil in the air, and almost no dust. Some places require a little looser, but not too dirty. We can understand these different requirements in the order from the cleanest to the most common.
Analysis of cooling mode of screw air compressor: the selection of air cooling and water cooling is based on the cooling mode of screw air compressor, and the operating environment, energy efficiency requirements and maintenance costs of equipment need to be comprehensively considered. The following from the technical principles, applicable scenarios and selection recommendations of the three parties
In the semiconductor industry, nitrogen plays a crucial role, especially in high-purity gas supply. The following is the semiconductor industry nitrogen related standards, terminology and its "soft" (I. e. non-technical, easy to understand) explanation
In the medical field, clean gas source is the cornerstone of ensuring patient safety and improving medical quality. Shanghai Granklin Group, as one of the leading enterprises in the air compressor industry, provides professional and reliable air compressor products for the medical industry with its innovative water lubrication oil free air compressor products
The mechanical rotating parts of oil-free compressors are not in direct contact with lubricating oil, but their auxiliary parts may be lubricated with oil and protected from contamination by sealing measures. The following is a detailed explanation: The core design of the 1. oil-free compressor: The core advantages of the oil-free compressor in the compression process
Air moisture content (in ppm) is not a fixed value, but a dynamic parameter that is influenced by a variety of factors, including temperature, humidity, geographic location and climatic conditions. The following is a detailed analysis: 1. definition and unit definition of air water content: air water content refers to the evaporation of water in the air.
The relevant requirements of the compressed air used in the fermentation tank are as follows: Pressure requirements: The pressure of the compressed air is generally required to be between 0.5-0.7MPa to maintain a stable fermentation process and avoid adverse effects of pressure fluctuations on fermentation. At the same time, there are also views put forward pressure
Analysis of Oil Content in Atmospheric Environment and Compressed Air Oil content in atmospheric environment is usually at a very low level, and the specific value is affected by geographical location, environmental conditions and other factors. In a clean outdoor environment, the amount of oil in the air (mainly from motor vehicle exhaust, industrial
About the technical description of the quality standard of compressed air for the bottle blowing process of cosmetic enterprises, the bottle blowing process of cosmetic enterprises has strict technical requirements for the quality of compressed air and must meet a number of international and national standards. After systematically combing the relevant specifications, we are now on the key technical indicators and management.
Estimating the amount of compressed gas in one year needs to be calculated in combination with production equipment parameters, operating time, gas fluctuations and losses, which can be achieved by equipment gas consumption statistics, unit product gas consumption or empirical estimation. The following are specific steps and examples: 1
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
