What are the key points of explosion-proof air compressor

I haven't noticed that there is an explosion-proof air compressor. I only know that there is an explosion-proof motor. Maybe your explosion-proof air compressor is an air compressor with explosion-proof motor?

Explosion-proof motors are often used in places with combustible gases to prevent sparks from igniting combustible gases and causing explosions. In fact, measures are taken on the motor to prevent sparks.

There are two main types of explosion-proof air compressors: Class I explosion-proof and Class II explosion-proof. Class I explosion-proof is the highest level of explosion-proof, belonging to underground explosion-proof, Class II explosion-proof is generally used in other explosion-proof places except underground.

Explosion-proof air compressors have special technical requirements. Most of these air compressors are used in mines to prevent accidents such as gas. They are said to be explosion-proof. It is very necessary to choose a qualified manufacturer. Now what kind of air compressor is not allowed to use in the mine.

The basic types of explosion-proof are: explosion-proof type, increased safety type, pouring sealing type, positive pressure type, intrinsically safe type, dust explosion-proof type, intrinsically safe type, dust explosion-proof type, oil immersion type, etc.

"Explosion-proof" means protection against explosion. The explosion must have three basic conditions at the same time, that is, combustible substances, combustible substances mixed with air (oxygen), the ignition energy caused by the explosion. "Explosion-proof" from these three necessary conditions to consider.

Design, install, use and maintain ventilation and fire fighting systems in accordance with standards and specifications. Select corresponding explosion-proof instruments and explosion-proof electrical equipment to ensure that the workplace meets the requirements of standards and specifications. The structures that must be standard are: flameproof type, increased safety type, positive pressure type, sand-filled type, intrinsically safe type and oil-filled type.

Lightning protection, anti-static and other measures must be implemented according to the specifications, open fire is strictly prohibited, and safety operation procedures must be strictly implemented. To prevent sparks, such as the use of arc switch, explosion-proof motor, anti-static clothing, the installation of fire cover, control of fire sources, strict smoking and so on.

Fire fighting equipment shall be complete and inspected on time and as required.