2026-04-09Views：
How to deal with a lot of water from the air compressor? Hello!
1. Add a freeze dryer. Also, if the air cooler of your machine is too small, look at the actual temperature of the air compressor exhaust port (not the temperature on the panel is actually the uncooled temperature, but the head exhaust temperature).
2. The simplest thing is to touch the pipe at the outlet of the air compressor with your hand, usually at 30-40 degrees. If the temperature is very high, consider increasing the cold dryer. Because the temperature of the gas is high, the air will gradually cool in the pipe and the water will condense out. The treatment method is to find a way to cool the air before the air enters your main pipe, and put the water away, such as increasing the air storage tank and adding a freeze dryer, oil-water separator, etc.
There is no fixed standard answer to the rotation cycle of the air compressor, because it depends on a variety of factors, including the type of air compressor, specifications, conditions of use, maintenance status and the actual needs of the enterprise. Generally, & l
Special oil is usually used in air compressors. These oils are divided according to their performance and applicable compressor types. They are mainly divided into the following types: 1. mineral oil type Features: The price is relatively low, but under high temperature and harsh conditions The performance may not be as good as synthetic oil. Life
When the water-lubricated air compressor is used in winter, the following matters need to be paid attention to: Antifreeze measures: Since the water-lubricated air compressor uses water as a lubricating medium, antifreeze measures must be taken in low temperature environments. Consider using a heater to preheat the cooling water, or
As an important industrial equipment, air compressor is widely used in many industries. The following are some of the most commonly used industries for air compressors: Machinery processing industry: In the machining process, air compressors can provide continuous and stable compressed air for driving
The choice of oil or oil-free type of air compressor mainly depends on the specific application needs and environmental conditions. The following are the main features and applicable scenarios of the two types of air compressors: Oil air compressor: Lubrication and cooling: Use lubricating oil to lubricate mechanical parts
The general air pressure in the factory is not a fixed value, but will be adjusted according to the specific equipment requirements and production process. However, some common reference ranges and standards can be provided to aid understanding. Air pressure standard of air compressor: often in the factory
The relationship between air compressor gas production and power is mainly reflected in the following aspects: the positive correlation between power and gas production: under normal circumstances, the greater the power of the air compressor, the more compressed gas per minute, thus the greater the gas produced. This relationship table
Oil-free air compressor, as the name implies, refers to the air compressor that does not need to use lubricating oil for lubrication during its operation. So does this mean that oil-free air compressors don't need to be oiled at all?
压缩空气进车间的压力一般在0.5MPa至0.8MPa之间，具体分析如下： 车身维修车间：该场景下压缩空气主要用于喷漆、气动工具操作等，为保证设备正常工作及操作安全，压力通常设定在0.5M
With the rapid development of society, the country has made great efforts to strictly control environmental protection production, and the application of oil-free silent air compressor, which is closely related to our life and work, has been vigorously promoted. How to use oil-free silent air compressor in the terminal, the market and industry will become more abundant
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
