The air compressor shows that the main engine is unbalanced.

When the air compressor shows the "host imbalance" fault, it usually refers to the core component of the air compressor-the compressor host is in an unbalanced state during operation. This failure can be caused by a variety of reasons, including but not limited to the following:

rotor imbalance: The weight on the rotor may be displaced due to long-term operation or accidental impact, causing the rotor to be unbalanced when rotating at high speed.

Bearing wear: The bearing is a key component that supports the rotation of the rotor. If the bearing is severely worn, it will cause the rotor to shake during rotation, which will cause imbalance failure.

Coupling problem: The coupling connects the motor and the compressor host. If the coupling is improperly installed or damaged, it may also cause the host to be unbalanced.

Mechanical loosening: If the bolts, nuts and other fasteners inside the compressor are loose, vibration and imbalance will occur during operation.

Sensor failure: Sometimes an unbalanced alarm may be false due to a problem with the sensor itself.

Shanghai granklin group air compressor product description:

shanghai Granklin Group is an enterprise specializing in providing air compressor solutions, with a wide range of products, including water-lubricated air compressors, oil-free air compressors, frequency conversion air compressors, screw air compressors and low-pressure air compressors. These air compressors have a power range of 7.5-250KW and a working pressure range of low pressure 0.3MPa to medium pressure 4MPa. In order to ensure the continuous and efficient operation of the air compressor, Shanghai Grankering Group also provides routine maintenance consumables, such as water filter elements and air filter elements.

Question: When the air compressor shows that the host is unbalanced, how should it be handled?

Answer: When the air compressor shows that the host is unbalanced, it is recommended to deal with it according to the following steps:

shutdown inspection: firstly, stop the machine immediately to avoid more serious damage caused by continuous operation.

Preliminary diagnosis: check the display screen or control panel of the air compressor to see if there is a more detailed fault code or prompt message.

Check the fasteners: check whether the fasteners of the compressor main machine and its related parts are loose, and tighten them in time if they are loose.

Check the sensor: Check whether the sensor related to the imbalance fault is working normally, and replace it if it is damaged.

Professional maintenance: If the above steps cannot solve the problem, it is recommended to contact the professional service personnel of Shanghai Granklin Group for further maintenance and diagnosis. It may be necessary to perform a dynamic balance test on the rotor, check for bearing wear, etc.

Maintenance: regular maintenance of the air compressor, replacement of worn parts and routine maintenance consumables, can reduce the probability of failure.