2026-04-09Views：
For traditional oil-lubricated air compressors, oil is a key component to ensure the normal operation of the compressor. It plays the role of lubrication, cooling and sealing. Therefore, in the regular maintenance cycle, the replacement of oil and oil filter is a common maintenance step. The oil will gradually degrade with the increase of use time and lose its performance, so regular replacement is necessary.
However, the situation is different for the water-lubricated oil-free inverter screw air compressor of Shanghai Granklin Group. Since this air compressor uses water as a lubricating medium instead of traditional lubricating oil, there is no need to change the oil during maintenance. The design of the water lubrication system allows the water to lubricate and cool during the compression process, while avoiding the problem of oil contamination.
For the maintenance of water lubricated oil-free air compressor, the focus will be on the following aspects:
water quality management: regularly check the water quality to ensure that the impurities and microorganisms in the water are controlled within a safe range to prevent damage to the internal components of the compressor.
Water system maintenance: check the tightness of the water system, prevent leakage, and ensure that the water flow is smooth to provide good lubrication and cooling effects.
Component inspection: Regularly check the key components inside the compressor, such as screws, bearings, etc., to ensure that their wear is within the normal range, and timely replace the severely worn parts.
Electrical system inspection: check the connection and insulation of the electrical system to ensure the safe and stable operation of the air compressor.
In short, for the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Granklin Group, it is not necessary to change the oil every time during maintenance. Instead, it is the management of water quality and the maintenance of the water system to ensure the normal operation and long life of the air compressor. For specific maintenance intervals and procedures, please refer to the maintenance manual provided by the manufacturer or consult the recommendations of professional technicians.
The requirements of air compressor for air moisture content mainly depend on its application scenarios and industry standards. The following is a detailed answer to the air water content requirements of the air compressor: General requirements: The air water content standard after air compressor drying treatment is usually very low, so as
Air compressor plays a vital role in the pharmaceutical workshop, its role is mainly reflected in the following aspects: 1. to provide power to support the air compressor can be a variety of pneumatic components in the pharmaceutical workshop, such as cylinders, pneumatic valves, pneumatic motors, etc., to provide stable
Answer: A few kilograms of air compressor value "bar",1bar is equal to 0.1MPa, the most circulating on the market is 8kg pressure screw air compressor.
When referring to Shanghai domestic oil-free air compressor, it is necessary to mention the water-lubricated air compressor of Shanghai Granklin Group. As a modern enterprise specializing in the design and manufacture of air compressors, Granklin Group is known for its high-quality and high-performance air compressor production.
During the manufacture and installation of air compressors and air storage tanks, as special equipment, daily management must be carried out in accordance with the relevant national and departmental safety management inspection regulations. In recent years, the air compressor explosion caused by the frequent occurrence of safety accidents, to the safety management
The normal pressure range of the air compressor is actually a bit like people's blood pressure, too high or too low is not good. In general, the pressure range of ordinary air compressors is relatively normal between 0.7Mpa and 0.8Mpa. This
Q: Does the general air compressor have oil? A: Yes. The most common is the piston air compressor, this air compressor everywhere has compressed gas oil content is very large. There are more screw air compressors used in factories, and screw air compressors are divided
The reasons for the high power consumption of the air compressor can be summarized in the following aspects: 1. the improper selection of the capacity is too large: the energy consumption of the air compressor is proportional to its capacity. If an excessive capacity is selected, the air compressor will consume more energy when compressing air. Therefore, in the election
The air compressor of the fermenter shall be equipped with the fermentation process requirements, air compressor performance parameters, system matching and safety and environmental protection requirements. The following are the specific configuration points: 1., the gas consumption required for the fermentation process shall be calculated according to the volume and stirring power of the fermenter.
During the operation of the air compressor, condensed water will be generated due to air compression and temperature changes. If it is not properly treated, it may cause pipeline corrosion, equipment wear and pollution at the gas end. The following from the moisture generation mechanism,
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
