2026-04-15Views：
During the operation of the air compressor, condensed water will be generated from the compressed air, which needs to be discharged regularly to maintain the performance of the equipment and the quality of the compressed air. The specific drainage frequency shall be comprehensively judged in combination with the operating environment and the operating state of the equipment:
if the ambient humidity is high, the equipment continues to operate or the amount of compressed air is large, and the condensed water accumulates faster, it is recommended to check the air storage tank daily and discharge the accumulated water in time. If the equipment is used frequently or the environment is dry, the inspection interval can be extended appropriately, but it is still necessary to confirm whether there is water in the gas tank regularly (such as every 2-3 days).
It should be noted that the drainage operation should follow the safety regulations: before discharge, it is necessary to ensure that the equipment has been shut down and the internal pressure has been released to avoid accidents caused by high temperature gas or residual pressure. Regular drainage can effectively prevent the internal corrosion of the gas storage tank, prolong the service life of the equipment, and ensure the dryness of the compressed air to meet the needs of the subsequent gas use.
The hospital compressed air station is the core facility of medical gas supply, and its function runs through the whole medical process from first aid to rehabilitation. The following from the four dimensions of equipment drive, gas supply, environmental support, quality control: 1. medical equipment power source life support.
Medical air compressors play a vital role in the medical field. It mainly provides high-quality compressed air for medical scenes such as medical equipment and operating rooms. The following are the main functions of medical air compressors: 1. provide power and support for medical equipment
The choice of oil-free and oil-free air compressors depends on the specific use scenario and needs. The advantages of oil air compressor: affordable: oil air compressor technology is mature, the production cost is low, so the market price is relatively close to the people. Stable performance: oil air compressor adopts lubricating oil
The power consumption of the air compressor mainly comes from the following aspects: The operation of the compressor: The compressor is the core component of the air compressor, which is responsible for compressing the air and increasing its pressure. This process needs to consume a lot of electricity. Compressor efficiency, model selection and
As an important power supply equipment, air compressor has a wide range of applications, covering almost all industrial fields. The following are some of the main application industries: 1. Industrial production of steel, chemical, cement and other industries: These industries require a lot of compressed air
7kg is the upper limit of the pressure for this air compressor to "work steadily". If it is water lubricated, it can output this pressure while also protecting itself without oil, clean gas and relying on water inside, which is especially suitable for places that require air quality.
The water content of the air from the air compressor is an important indicator, which is affected by many factors, including the working environment, the design of the air compressor equipment and the maintenance status. Generally speaking, the water content of air compressor is usually between 20% and 40%, but the specific value will be based on
When the oil content of the compressed air needs to reach a very low level of ≤ 0.01ppm, it is usually recommended to use an oil-free air compressor. The oil-free air compressor does not use lubricating oil during the compression process, so it can ensure that the compressed air produced is almost completely oil-free, which is very suitable for air
Compressed air standards for industrial use focus on its cleanliness, dryness, pressure stability and other core indicators, these standards are designed to ensure the safety, stability and product quality of compressed air in various industrial applications. The following from the quality indicators, the industry should be
The air compressor flow rate is how much gas this machine can spit out per minute. You can understand it as the water output of the faucet, but it is not water, but compressed air.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
