Screw air compressor start and stop intermittent only 30 seconds

Screw air compressor start and stop intermittent only 30 seconds may be caused by a variety of reasons. First, this intermittent work may be related to changes in load demand. When the load demand fluctuates or changes in a short period of time, the screw air compressor may start and stop according to the demand. For example, in some production processes, gas demand may suddenly increase or decrease, causing the air compressor to start or stop accordingly.

Secondly, the pressure control system may also be one of the reasons for this intermittent operation. Screw air compressors are usually equipped with a pressure control system, which adjusts the working state of the air compressor according to the set pressure range. When the pressure reaches the set value, the air compressor may stop working and restart after the pressure drops to a certain level to maintain a stable pressure range.

In addition, machine failure or damage may also be one of the reasons for frequent start and stop of the screw air compressor. For example, problems such as power line failure, air inlet blockage or poor cooling water circulation may affect the normal operation of the air compressor. In this case, it is necessary to check and repair the fault in time to ensure the stable operation of the air compressor.

Finally, it should be noted that frequent start and stop may adversely affect the life and performance of the screw air compressor. Therefore, it is recommended to carry out reasonable maintenance and maintenance of the air compressor to reduce the possibility of failure and extend its service life. If the problem persists or cannot be solved, it is recommended to contact professional air compressor maintenance personnel for further inspection and maintenance.