2026-04-09Views：
The 10 years of air storage tank is not a mandatory end-of-life period, but a design life. In fact, whether the gas storage tank can continue to be used after this period needs to be evaluated according to the actual situation.
First of all, it is necessary to consider factors such as the manufacturing quality of the gas tank, the use environment and user habits. High-quality gas storage tanks and good usage habits can extend their service life. On the contrary, if the gas storage tank is often exposed to humid environment or affected by other adverse factors, its corrosion rate will be accelerated and its service life may be shortened.
Secondly, for gas storage tanks that exceed the design service life, they need to be inspected by relevant departments every year to ensure their safety and reliability. If the gas tank or its accessories are found to be unqualified, it shall be scrapped in time.
Finally, in order to ensure continuous and safe gas supply, it is recommended to prepare new equipment in time after the design life of the gas tank.
In short, air storage tanks do not necessarily need to be scrapped after 10 years of use, but they need to be fully inspected and evaluated to ensure their safety and reliability. At the same time, it is a wise choice to prepare new equipment according to the actual situation and demand.
The replacement cycle of the lubricating oil of the new screw air compressor is affected by the type of lubricating oil, the working environment and the frequency of use. The following is a detailed guide: 1. the first oil change cycle, the running-in period of the new machine: it is recommended to replace the first lubricating oil after 500 hours of operation to remove the initial oil.
After a period of time, the after-sales personnel of the screw air compressor will overhaul the air compressor once, replace some filter materials with short time periods of the air compressor once, and overhaul and maintain the air compressor. 1. Clean the valve, clean the valve seat, valve cover carbon deposition, cleaning
In the manufacturing process of cement products, whether an air compressor is needed depends on the specific production process and equipment requirements. However, from a general point of view, air compressors do play an important role in the manufacture of cement products. The manufacture of cement products usually involves a series
There are significant differences between power frequency and permanent magnet variable frequency air compressors in many aspects. The following is a detailed summary of these differences: 1. motor type and working principle Power frequency air compressor: usually an asynchronous motor is used to drive the motor through the alternating current provided by the power supply. Turn
Analysis of oil content of oil-injected screw air compressor: standard, influencing factors and optimization scheme 1. oil content standard and industry requirements The oil content of compressed air of oil-injected screw air compressor usually needs to be controlled within 3ppm(3 mg/m & sup3;), but the specific standards vary according to the application scenario: general
How long can an oil-free air compressor that operates all the year round last? Sometimes, after an air compressor leaves the factory, it is not that the expected service life is not reached, but that the user purchases parts other than the manufacturer to replace, then the machine is out of protection. At this time manufacturers will be depressed, the factory choice of oil-free air compressor parts are carefully selected, users may choose third-party procurement. This is rare for large enterprises, most of which are small factories that purchase parts from outside the manufacturer.
View detailsFrequency conversion screw air compressor is a kind of air compressor which uses double rotor impeller to work on gas. It combines the advantages of frequency conversion technology and screw compression technology, and has the following significant characteristics and advantages: small size and light weight: this air compressor structure design
Whether adsorption dryers and filters are special equipment depends on their specific design, manufacture and use conditions. In general, the adsorption dryer itself does not belong to special equipment. Adsorption dryer is a kind of adsorbent (such as activated alumina,
The scroll type and screw type in the compressor are two different types of compressor technology, and their working principles and structural characteristics are obviously different. Working principle: Scroll compressor: The working principle of scroll compressor is through the moving scroll and static
Generally, the first maintenance of a new machine is 500 hours, and the second maintenance is about 2000 hours, which can be determined by the specific use environment. Time is not fixed, but if the environment is too bad, it is best to maintain it in advance. If the environment is good, it can be slightly delayed.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
