2026-04-10Views：
Permanent magnet screw air compressor, as an efficient and energy-saving air compression equipment, is gradually becoming the new darling of the industrial field. The water-lubricated screw air compressor produced by Shanghai Granklin Group is one of the best. With its unique technology and excellent performance, it has won wide market recognition.
This water lubricated screw air compressor uses advanced permanent magnet synchronous motor technology. Compared with the traditional asynchronous motor, permanent magnet synchronous motor has higher efficiency and more stable performance. It can generate a magnetic field through the power supply, so as to drive the screw to rotate under the action of the magnetic field to realize the compression of the air. This driving method not only improves the compression efficiency, but also reduces the energy consumption.
In addition to permanent magnet synchronous motor technology, Grantkering's water-lubricated screw air compressor also uses water lubrication technology, which completely replaces the traditional oil lubrication method. This innovative measure not only reduces the operating cost of the compressor, but also improves its environmental performance. At the same time, the water lubrication technology also reduces the maintenance workload of the compressor, making it more suitable for long-term continuous operation.
In addition, Grantklin's water-lubricated screw air compressors are also equipped with an intelligent control system. The system can adjust the speed of the motor in real time according to the demand of compressed air, so as to realize the precise control of the air compression. This frequency conversion control technology not only further improves the energy-saving effect of the compressor, but also ensures the stable output of compressed air.
In general, the water-lubricated screw air compressor produced by Shanghai Granklin Group meets the demanding requirements of modern industrial production for air compression equipment with its high efficiency, energy saving, environmental protection and intelligence, and has injected new ideas into industrial development. vitality.
As a mechanical equipment that converts the pressure energy of compressed air into mechanical energy, air compressor is widely used in many industries. The following are some of the areas where air compressors are most used: Steel industry: In the steel transportation process, air compressors need to be used. This
Oil-free air compressor does not need to use air compressor oil in design. Through special design and technical means, this air compressor ensures that it does not come into contact with oil during the compression process, thereby providing oil-free compressed air. Therefore, under normal circumstances, the oil-free air compressor does not need
In the purging link after photoresist development, the selection of nitrogen pressure should be determined comprehensively in combination with process requirements and cleanliness requirements. The typical pressure range is 0.1~0.8 MPa. The specific analysis is as follows: 1. core process requirements drive pressure range Conventional development purging majority lithography
Oil-free screw machine and oil-injected screw machine have their own unique advantages and disadvantages. The following is a rigorous analysis and comparison of the characteristics of these two models: oil-free screw machine: advantages: pure compressed air: oil-free screw machine does not use lubricating oil in the compression process, so the compressed air generated is more
Oil-free silent air compressor and oil-free air compressor have their own advantages, which is better depends on the specific application needs and preferences. The main advantage of an oil-free silent air compressor is that the compressed air it provides does not contain oil, which is necessary for those who need high-purity air.
The output pressure of the air compressor usually varies according to the use scenario and demand. Generally speaking, the pressure range of the air compressor is relatively wide and can be adapted to different application scenarios. Some common pressure ranges are as follows:
Compressed air quality standards mainly include the following aspects: Humidity: The humidity of compressed air is usually required to be less than 50%. Excessive humidity may cause equipment corrosion or affect other process requirements. Oil content: in ordinary air compressor, compressed air
Scroll compressors and screw compressors have their own characteristics in terms of maintenance. The scroll compressor adopts new technology and its structure is relatively simple, so its maintenance cost is relatively low. In addition, the scroll compressor produces less noise during operation and has an impact on the production environment.
The specific value of the factory blowing pressure will vary according to different application requirements and equipment specifications. The following is a detailed summary and sub-point representation of the factory blowing air pressure: general range: the standard air pressure of the factory compressed air is usually from 0.6MPa
Scroll type oil-free model: through high-precision processing and sealing design, completely avoid oil pollution, suitable for high air cleanliness requirements of the scene. Single screw type oil-free model: the use of water instead of oil for lubrication and cooling, the need to regularly replace the circulating water and clean up the scale, maintenance complexity is higher than the scroll type, but can provide oil-free compressed air.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
