2026-04-09Views：
In order to generate a pressure of 1.5mpa (megapascals), the discharge pressure of the air compressor needs to be greater than or equal to 1.5mpa.
The specific air compressor size (such as power, exhaust volume, etc.) will also be affected by other factors, such as compressed air flow demand, application scenarios, etc.
Regarding the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Granklin Group, the following is a description of the product:
the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Grankering Group is an efficient and environmentally friendly air compression equipment. The air compressor adopts water lubrication technology, which completely avoids the use of traditional lubricating oil and ensures the purity of compressed air. At the same time, frequency conversion technology is used to automatically adjust the operating speed of the compressor according to actual needs to achieve high efficiency and energy saving. The power range of this product is from 7.5KW to 250KW, which can meet the needs of different users.
In order to determine the specific size of the air compressor to produce 1.5mpa pressure, it is recommended to contact a professional air compressor manufacturer or seller (such as Shanghai Granklin Group) to provide detailed compressed air requirements and application scenarios in order to obtain accurate recommendations and selection recommendations.
Air compressor does need maintenance. Air compressor, as a device that compresses air as a power source, has many mechanical parts and lubrication systems inside. With the passage of time and the increase of the frequency of use, these parts will gradually wear out, and the lubricating oil will deteriorate or consume
Yes, when the pressure of the screw air compressor reaches the set upper limit, it will automatically stop. The automatic start-stop function of screw air compressor is usually monitored and controlled by pressure sensor. When the pressure of the air compressor reaches the set upper limit, the pressure sensor will send a signal
According to the oil content of the exhaust gas, the air compressor can be divided into oil air compressor, micro oil air compressor and oil free air compressor. The following is a detailed analysis of the oil content of these three air compressors: 1. oil content of oil air compressors: oil air compressors will
Air compressor plays a vital role in the production of lithium batteries, and its role is mainly reflected in the following aspects: 1. provide clean and stable compressed air. The production of lithium batteries has extremely strict control of process parameters, of which gas pressure is a Vital finger
The detection of water content in the air of air compressor should be carried out according to national standards or industry standards. Under normal circumstances, in the standard GB/T3853-2018 "Technical Conditions for Air Compressors", the saturated water content of compressed air is 3 when the relative humidity is 100 at 30 ℃.
The working principle of water lubricated single screw air compressor and the product analysis of Shanghai granklin group air compressor, referred to as air compressor, is an indispensable power equipment in industrial production. In many air compressor types, single screw air compressor with its unique structure and
Natural gas compressor belongs to special equipment. Special equipment refers to the equipment involving life safety and high risk, including boilers, pressure vessels, pressure pipes, elevators, lifting machinery, passenger ropeways, large amusement facilities and special motor vehicles in the field (factory)
When selecting an air compressor according to the air consumption of the equipment, the following key factors need to be considered: Determine the air consumption: First, understand the rated air consumption of all gas-using equipment and accumulate them to obtain the total air consumption of the entire process or system. Consider the equipment
In the production process of electronic factory, air compressor is one of the indispensable important equipment. It is mainly used to provide compressed air to support the normal operation of various pneumatic tools, equipment and production lines. For electronics plants, choose an efficient, stable and maintenance cost
Turn on the 1. screw air compressor 1) Turn on the power supply and check whether the power indicator is on. 2) Press the start button, the main controller automatically controls the loading and unloading of the air compressor. 3) Check the oil level during loading, and the oil must be between the upper and lower lines.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
