2026-04-09Views：
In the process of using the screw air compressor, some factories will have insufficient gas supply. What causes that?
In fact, the selection of machines, air leakage, gas production standards, machine wear and other aspects may produce insufficient gas supply, resulting in the production workshop equipment can not operate normally.
1. Selection problem: When a few users purchase air compressors, they are not very clear about the gas consumption in the factory production workshop. Blind selection results in the selection of compressor units that are too small and the displacement of the units is less than the gas consumption required for production. In this case, users and friends need to increase the air compressor, so in the selection of the time can be cautious.
The professional screw air compressor sales team of Shanghai granklin group can recommend the models suitable for your factory according to the number of machines and working hours in your factory.
2. Air leakage problem: Air leakage is the main reason for insufficient air supply of screw air compressor. Check whether there is any air leakage at the joints such as external pipes, air supply pipes, one-way valves, safety valves and pressure switches. For places with air leakage, timely maintenance measures shall be taken.
3. Increase equipment: If gas equipment is added, which is what we often say to expand production, the gas consumption required for production will exceed the gas production of the air compressor. Even if the machine has been producing gas, it will not meet the normal production, which may make users think that the gas production is insufficient.
4, machine wear: the main screw air compressor wear will lead to insufficient gas production, wear parts should be replaced and repaired.
The role of oil-free air compressor: Oil-free air compressor is designed to meet various applications that have strict oil-free requirements for compressed air. It is mainly used to produce pure compressed air without oil, which is very important in many industrial and commercial occasions, especially
The oil level classification standard of air compressor is mainly defined according to the oil content in compressed air. The following is a detailed summary of the oil content classification standards for air compressors: 1. to the international standard ISO 8573-1: oil content ≤ 0.01 mg/m & sup
The screw air compressor does not need to be turned on all the time, and the operation mode can be flexibly adjusted according to the actual gas demand to take into account the production demand, equipment life and energy efficiency. The following is the specific analysis: Does the 1. need to be opened all the time? Core conclusion Non-continuous gas use scenario: If raw
空压机的有油和无油选择主要取决于具体的应用需求和场景。以下是对两种类型空压机的简要比较： 有油空压机： 优点：由于使用了润滑油，机械部件的磨损相对较小，因此可能具
Micro-oil screw compressor and oil-injected screw compressor are two common types of screw air compressors, which are significantly different in lubrication mode, working principle, application scenario and maintenance requirements. The following are the specific differences between the two: 1. Lubrication methods and work
The purity of compressed air can usually reach between 99.2 and 99.99 percent, depending on the type of air compressor, subsequent purification measures and the application scenario. The following are the key factors affecting the purity of compressed air and specific instructions: 1. core factors
The selection of air compressor equipment requires high-efficiency compressors. In view of the gas consumption in enterprise production, the use of gas during peak and trough periods needs to be considered. Variable working conditions can be adopted and permanent magnet frequency conversion screw air compressor can be adopted, which is beneficial to energy saving. At present, the domestic permanent magnet variable
The air compressor can work for a long time, but it is necessary to pay attention to the reasonable arrangement of running time and regular maintenance. Air compressor is a kind of large-scale equipment, which is widely used in production lines, factories, hospitals and other places, and can work continuously for a long time. Especially screw air compressor, design
In recent years, Shanghai Grankering Group, as one of China's leading manufacturing solution providers, has been committed to leading the industry's technological innovation. In the field of air compressors, Grancering Group has not only introduced the most advanced technology, but also introduced a number of advanced frequency conversion.
Many different types of enterprises need to use air compressors. The following are some of the main application industries and types of enterprises: Manufacturing: Machinery manufacturing enterprises: used to drive tools, equipment and small machinery and equipment to improve production efficiency. Automobile Manufacturing
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
