Optimal setting of displacement of screw air compressor

When we bought the machine, we definitely want to use its advantages to maximize its efficiency. Then we are not ignoring everything and blindly maximizing all settings. This does not guarantee that every part of the machine will be used reasonably. In case of failure, it will violate our purpose. Then we can do the following.

Before using the air compressor, you need to read the air compressor manual carefully.

2. In order to effectively save electricity, users should pay attention to the ventilation and heat dissipation of the air compressor room. The ambient temperature of the air compressor room is too high, which is equivalent to reducing the efficiency of the air compressor, reducing the exhaust volume and increasing the energy consumption. For every 100°C increase in ambient temperature, the efficiency of the air compressor is reduced by about 3%.

3. In addition, the screw air compressor room should be kept clean and tidy. Air compressor room environment is too dirty, easy to cause air compressor filter, oil filter, oil separator blockage, lubricating oil accelerated pollution, frequent replacement.

4. The air compressor for regular maintenance, try to use the original parts. If the air compressor is poorly maintained or not maintained for a long time, small problems will accumulate over time into major failures and the life of the machine will be shortened artificially.

5. Screw air compressor as far as possible centralized gas supply. If the air compressor is distributed in all parts of the plant, the pipeline is independent, which not only increases the purchase cost, but also increases the pipeline cost and operation and maintenance cost. Especially if the pipeline leakage is serious and not found in time, thinking that the gas consumption is insufficient, use a newly purchased air compressor to supplement the insufficient gas consumption, resulting in waste.

If we pay attention to the above points, we can reduce the energy consumption of the air compressor, improve the work efficiency and save the cost. Take the pipeline leakage as an example: take a 7kg/cm2g,10mm leakage point as an example, assuming that the electricity charge is RMB 1 yuan/degree, 8000 hours a year will waste 320000 RMB electricity charge. This waste of cost is terrible and we should avoid it.

Air compressor displacement increase can purchase Shanghai granklin group production, water lubricated air compressor.