Is the mine air compressor oil or electricity

Is the mine air compressor oil or electricity

many people ask whether the mine air compressor uses oil or electricity. In fact, this question is what drives the machine. Simply put, there are two main driving methods, one is driven by electricity, and the other is driven by oil.

First of all, the air compressor driven by electricity. After the machine is connected to the power supply, the motor starts to rotate, driving the compression parts inside to work and compress the air step by step. If there is a perfect power supply line in the mine, electric drive is the most common choice. The advantage of electric drive is that it runs smoothly, the noise is relatively small, and electricity is relatively easy to obtain, and the daily use cost is not high. Most of the air compressors that are fixed in a certain position of the mine for a long time are driven by electricity.

Let's talk about oil-driven air compressors. Some mines are located in remote areas, it is inconvenient to pull wires, or the construction site changes frequently. At this time, diesel or other fuel will be used to drive the air compressor. Oil drive means that a small fuel engine is installed in the machine, which burns oil to generate power and drive the air compressor to run. The biggest advantage of this method is that it is not restricted by wires and can be used wherever it goes. It is especially suitable for highly mobile operation scenarios. However, burning oil will produce exhaust gas and noise, and the fuel needs to be replenished at any time, which is not as worry-free as connecting electricity.

What about the water lubricated air compressor. Water lubricated air compressor is a kind of machine which has been changed in the way of lubrication. Ordinary air compressors use oil to reduce friction between internal parts, while water-lubricated air compressors use water instead of oil, allowing water to flow inside the machine to reduce friction and take away heat. The water-lubricated air compressor can also be driven by electricity or oil. It does not determine the driving method, but determines what is used to protect the parts inside the machine. The gas discharged by the water-lubricated air compressor does not contain oil, which is more friendly to the air quality in the mine, and water is easier to obtain than oil, and daily maintenance is relatively simple. In some of the air cleanliness requirements of the mine work surface, water lubricated air compressor is more and more involved in the actual work.

So back to the original question, whether the mine air compressor uses oil or electricity, the answer is that there are two driving modes. Where there is electricity, it is preferred to use electricity to drive, and where there is no electricity or it is not convenient to connect electricity, it is driven by oil. As a new lubrication method, the water-lubricated air compressor can be used in both electric and oil-driven machines. It makes the gas used in the mine cleaner and makes the daily care of the equipment easier. The choice of which way, ultimately depends on the actual conditions and work needs of the mine.