Granklin Air Compressor Advertising Copy - Welcome to Join and Order

What does the rated pressure of air compressor 7kg refer

2026-05-11Views:

air compressor rated pressure 7kg is what does that mean?

In simple terms

"7kg" refers to this air compressor maximum gas pressure capable of continuous and stable output it is equivalent to 7 kilograms of thrust per square centimeter of area. You can imagine it as pumping up the tires and hitting a certain level of immobility. The "immobility" drive is the embodiment of pressure.

For example: just like you push a door with your hand, the pressure of 7kg is about the same as that of 7kg of strength to firmly press on the door, and the door does not move-this is the upper limit of the "hard work" of this machine.

What is this pressure enough?

In general, the pneumatic wrench, paint spray gun, soot blowing and pneumatic valve in the factory can basically cope with the pressure of 7kg. However, if it is an occasion that requires special strength, such as large-scale injection molding or some special processes, it may not be enough.

How does the water lubricated air compressor participate in this?

If this 7kg pressure air compressor uses water lubrication technology the way it works is very interesting-the inside of the machine does not use oil to help seal and cool down, but directly uses water to complete these tasks.

Specifically:

  • when compressing air the water will form a layer of water film between the rotor and the cavity, separating the two metal surfaces, not only preventing them from direct friction, but also taking away the heat generated by compression.
  • The gas that comes out there will be some water vapor inside, but because there is no oil involved in the entire compression process, the air coming out is very clean and there is no need to worry about oil pollution.
  • When the machine is running, water circulates continuously in it, cooling while lubricating, just like adding coolant to the engine, but the "coolant" here is also doing the work of lubricating oil.

Why care about this 7kg?

Because this is the one the manufacturer told you. "Promise Value"-- The machine can work for a long time and without stopping under this pressure, without overheating or problems. If you exceed this value to use, the machine will be difficult and its life will be shortened.

Just like a car's manual says "maximum load 500kg", you can't run with 600kg, but tires and brakes are easy to break down after running for a long time.

One sentence summary

7kg is the upper pressure limit for this air compressor to "work steadily". And if it is water-lubricated, then while outputting this pressure, it can also protect itself without oil, clean gas, and rely on water inside, which is especially suitable for places that require air quality.

More Recommendations

  • 2026-04-10

    How long is the screw machine maintenance cycle?

    The maintenance cycle of the screw machine can be determined according to a number of factors, including the use environment of the equipment, the frequency of use, the condition of the equipment, etc. Generally speaking, the maintenance of the screw machine can be divided into daily maintenance and large maintenance. Daily maintenance: the recommended cycle is 1~2 months

    View details
  • 2026-04-14

    Is the water in the air compressor clean?

    The water in the air compressor may not be clean, mainly from dust and condensate in the air. The following is a detailed analysis of the reasons why the water in the air compressor may not be clean: 1. Dirty sources Dust and impurities in the air: When the air compressor sucks in air, it will be empty

    View details
  • 2026-04-09

    Oil-free high pressure air compressor maintenance

    The maintenance of oil-free high-pressure air compressor mainly includes the following aspects: daily cleaning and maintenance: basic daily cleaning and maintenance should be carried out every day, including dust removal, floating ash, etc., to keep the air compressor and its surrounding environment clean. Clean environment can greatly reduce the machine

    View details
  • 2026-04-15

    Theoretical exhaust volume of air compressor

    Technical analysis on the theoretical exhaust volume of air compressor In the field of air compression equipment, the theoretical exhaust volume is one of the core parameters to evaluate the performance of the equipment, and its definition and calculation method can be explained as follows: basic definition The theoretical exhaust volume refers to the ideal state of the air compressor.

    View details
  • 2026-04-09

    Advantages of water-lubricated oil-free air compressor

    Oil-free and water-lubricated air compressors, as a category with excellent sales volume in air compressors, naturally have their "human" advantages. Today, we will popularize science on the advantages of oil-free and water-lubricated air compressors. Non-professionals who do not know about non-oil-water lubricated air compressors

    View details
  • 2026-04-10

    Start-up sequence of cold dryer and air compressor

    The starting sequence of the cold dryer and air compressor is: first open the cold dryer, then open the air compressor. At the same time, the shutdown sequence is opposite to the startup sequence, that is, the air compressor is closed first, and then the cold dryer is closed. During the operation, it is necessary to pay attention to the prohibition of frequent opening and closing of the cold dryer to avoid burning out

    View details
  • 2026-04-15

    Does the air compressor need water?

    Whether the air compressor needs to receive water depends on its cooling method, which is mainly divided into the following two categories: 1. Water-cooled air compressor: Need to receive water Principle: Reduce the working temperature of the compressor and improve efficiency through cooling water circulation. Applicable scenarios: high-power air compressor (usually> 30 kW): heat dissipation requirements

    View details
  • 2026-04-10

    The difference between oil-free scroll air compressor and oil-free screw machine

    There are several key differences between the oil-free scroll air compressor and the oil-free screw air compressor: Working principle: The oil-free scroll air compressor rotates around the center of the base circle of the fixed scroll through the movable scroll and meshes with each other to achieve suction., Compression and exhaust process.

    View details
  • 2026-04-14

    The difference between oil-free screw air compressor and oil-free air compressor

    The difference between oil-free screw air compressor and oil-free screw air compressor is mainly reflected in the following aspects: 1. working principle Oil screw air compressor: lubrication and cooling: during the compression process, lubricating oil participates in the compression to lubricate the main engine The role of internal running parts, while taking away the cause

    View details
  • 2026-04-14

    Is it better to refuel the air compressor or not

    When discussing whether the air compressor is refueling well, we must first clarify two different types of air compressors: oil air compressors and oil-free air compressors, each of which has its own advantages and disadvantages. The advantages of oil air compressor: good lubrication performance: the use of lubricating oil can effectively reduce mechanical wear,

    View details