2026-04-09Views：
Q: How to solve the problem of too serious moisture in the air compressor?
Answer: It is normal to use an air compressor with a lot of water. As the name implies, the water-lubricated air compressor of Shanghai granklin Group uses water to lubricate the air compressor head. The compressed gas must contain water vapor, but it is not dripping water all the time as you think, but the water content in the air is high.
The air compressor itself will filter out liquid water. Compressed gas with rich water content enters the rear equipment. The gas coming out of the air storage tank-cold dryer (suction dryer)-precision filter, etc. is compressed air with high cleanliness.
Oil-free air compressor, the name sounds like it is a "maintenance-free" guy, but in fact, any machine needs our love and care! Although the oil-free air compressor does not need to add lubricating oil during operation, it reduces
When discussing the problem of which is the best permanent magnet variable frequency screw air compressor, Shanghai granklin group stands out with its excellent water lubricated air compressor products. As a leader in this field, Granklin Group focuses on the research and development of oil-free screw compressors.
In the air compressor industry, permanent magnet frequency conversion technology has become the key technology to improve energy efficiency and stability. So, which brand of permanent magnet variable frequency air compressor is better? This article will focus on the water-lubricated screw air compressor produced by Shanghai Grankering Group, with its
The air compressor can be placed outdoors, but corresponding protective measures need to be taken. The reasons are as follows: environmental factors: the outdoor environment is complex and changeable, and the air compressor is susceptible to natural factors such as rain, sand, and sunlight. These factors may lead to air compressor short circuit, ash
Whether the medical air compression equipment room has explosion-proof requirements depends mainly on its specific environment and application requirements. The following is a detailed analysis of this problem: The necessity of 1. explosion protection requirements Environmental factors: If the medical air compression equipment room is located in a flammable and easy
The maintenance cycle of the air compressor mainly depends on its frequency of use, working environment and the model and quality of the air compressor. Generally speaking, air compressors need regular maintenance to ensure their normal operation and extend their service life.
The main differences between the suction dryer and the cold dryer are as follows: Working principle: The suction dryer: The moisture in the compressed air is adsorbed by the adsorbent (such as silica gel, activated alumina, etc.) to achieve the drying effect. When the adsorbent is saturated, it needs to be regenerated.
Q: What is the difference between power frequency and permanent magnet frequency conversion? A: The motor of the power frequency air compressor is running at a fixed speed and full load every time it starts. The motor of the permanent magnet variable frequency air compressor has less impact on the power grid, which is to gradually increase the speed to reach the air pressure and maintain the pressure.
Factory air compressor conventional air pressure: In the factory environment, the conventional air pressure of the air compressor is usually determined according to the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is 5-13 bar (I .e. 500-1300 kPa or 72.5-188.5 psi)
Oil-free compressors and oil-free compressors have their own advantages and applicable scenarios, so it is impossible to simply judge which one is "best", but needs to be selected according to specific application requirements. Advantages of oil-free compressors Environmental protection: oil-free compressors in the compression process
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
