2026-05-26Views：
Standard range of compressed air pressure in pharmaceutical factory
Pharmaceutical factory in the production process will use compressed air, different use of the scene on the pressure requirements are not the same.
the pressure of the air used to drive the instrument and the automatic valve does not need to be too large, and it is enough to allow the signal to be transmitted accurately. The air used to stir materials, transport powder and purge pipelines will require significantly higher pressure to drive the smooth operation of the equipment. The air used in the packaging and filling process has different requirements for pressure. It is necessary to ensure that the packaging is tightly sealed and the filling process is stable.
The water-lubricated air compressor can work well in the air supply system of the pharmaceutical factory. This kind of air compressor uses water to complete lubrication and sealing, and the output air will not be mixed with oil mist, which is very critical to the production of drugs, because the cleanliness of the air is very high. When the water-lubricated air compressor is working, the water forms a layer of water film inside the machine, separating the moving parts, which not only reduces wear, but also takes away the heat generated during compression. Although the water content of the air will be too large, but because there is no oil pollution, as long as the water is removed through the drying device, you can get very pure compressed air.
In the complete air supply scheme of the pharmaceutical factory, the water lubricated air compressor is generally used with drying equipment and filtering equipment to ensure that the air sent to each air point is clean and stable. Different gas links require different pressures, so the system will be adjusted according to actual needs, so that each link can use air with appropriate pressure, which not only meets production needs, but also does not waste energy because of too much pressure.
In the process of chemical synthesis, process compressed air plays a vital role, and its application runs through many key links. The specific functions are as follows: Provide oxidants 1. chemical reactions and synthesis: Oxygen in compressed air is an important oxidant for many chemical reactions. Example
The air blown by the air compressor is all water. The possible reasons are as follows: the reason for the post-processing equipment. Compressed air through the air storage tank and dryer filter drainage system, if the post-processing equipment configuration is not perfect or its separation effect is poor, it is easy to cause
Whether the air compressor can run for a long time is a complex problem, because it depends on many factors, such as the type of air compressor, quality, use environment and maintenance. Generally speaking, the air compressor is not recommended to run continuously for a long time for the following reasons
The general range of workshop air pressure is usually set between 0.7MPa and 1.0MPa, which is to ensure the normal operation of equipment and processes. For the machining workshop, the pressure requirement of air pressure is generally between 0.5 and 0.7 MPa (MPa), which can meet
The low oil pressure of the dry oil-free air compressor may be caused by a variety of factors. The following are some possible reasons: Insufficient oil: Insufficient oil is the direct cause of the drop in oil pressure. When the amount of oil in the air compressor is insufficient, the system cannot establish sufficient
Oil-free, water lubrication is now the mainstream products in the air compressor market, mechanical equipment sales more, there will be some more common problems feedback. What is the reason for the slow pumping of water lubricated air compressor? Air compressor flow reduction, in any one air compressor manufacturers, are currently unable to solve. Naturally, we can't see this kind of situation for new machines. If the time span is 3 or 5 years, it is normal for compressed gas flow to decay.
View detailsShutdown protection may be triggered when the air compressor discharge pressure is as low as 0.2-0.5MPa (about 2-5bar), the specific value varies by model and design. The following analysis is carried out from the two dimensions of conventional and water-lubricated models: 1. the basis of the typical shutdown pressure range of conventional air compressors.
In the production of electronic semiconductors, air compressors play a vital role. The following is a detailed explanation of its role: First, the air compressor provides a stable gas source for the production process. Requirements for gas purity, humidity and pressure in semiconductor production process
The standard for oil-free compressed air is mainly defined according to the international standard ISO 8573-1, which specifies the classification and purity level of pollutants in compressed air, including solid particles, water (humidity) and oil. Compressed air in oil-free square
Answer: The pressure range of atmospheric air compressor is between 0.7Mpa and 0.8Mpa, and the pressure range of low pressure air compressor is between 0.4 Mpa and 0.8 Mpa. As an air compressor manufacturer, Shanghai granklin
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
