2026-04-09Views：
q: screw permanent magnet variable frequency air compressor?
Answer: Screw air compressors of permanent magnet frequency conversion series are very popular in recent years, and the energy-saving effect is much better. After all, air compressors do not cost much if they are not bought back, and air compressors have always accounted for a relatively large proportion of energy consumption.
Permanent magnet variable frequency screw air compressor has several obvious advantages:
1. The air pressure is stable, and the continuously variable permanent magnet variable frequency motor runs very smoothly, and there is almost no impact on the power. The working pressure is more stable.
2, energy saving, permanent magnet frequency conversion motor energy consumption is much lower than ordinary power frequency air compressor.
3. The motor direct drive transmission efficiency is very high.
In the field of low-pressure screw air compressors, if you want to specifically mention the water-lubricated air compressor of Shanghai Grankering Group, the following is a detailed recommendation for this product: Shanghai Grankering Group's water-lubricated air compressor power and working pressure range: The air compressor is at 7.
The moisture content in the air is not a fixed value. It is affected by many factors such as temperature, pressure, humidity, etc. The following is a detailed description from different angles: The moisture content in the standard state is in the standard state (temperature is 0 ℃, pressure is 1 Under standard atmospheric pressure), dry
The reasonable range of the vibration value of the air compressor can be different according to different standards and requirements. Generally speaking, when the motor is no-load, the vibration value and vibration speed of the motor will be measured, and the vibration value of the motor should usually be less than 0.03. For 75kw air compressor, its standard
The gas source design of the factory must consider the gas volume, which is the key factor to ensure the stable operation of the production. The following is a detailed description of the core requirements of the gas source system, the risk of insufficient gas volume, the hidden dangers of excess gas volume and the optimization direction: 1. gas source system
Air compressor air volume and flow of the relationship and Shanghai Grankering Group air compressor product analysis 1. Introduction In industrial production, air compressor as an important power equipment, for a variety of pneumatic tools and machinery to provide the required power source. Air pressure
Fermentation production relies more heavily on compressed air than many people think. From seed tank inoculation, fermentation tank stirring to post-filtration and filling, each link is inseparable from a stable gas supply. However, the fermentation environment is quite special, there are a large number of microorganisms in the tank, and there are clear requirements for the cleanliness and water content of the gas. Once the gas is mixed with oil or too much water, it is likely to affect the activity of the bacteria, resulting in fluctuations in the quality of the batch of products.
Hospital air compressor room is an important part of hospital facilities, mainly for the hospital to provide a variety of medical equipment required by the compressed air. This compressed air is widely used in all aspects of medical diagnosis, treatment, surgery and daily operation. Specific
Factory production needs to be able to provide highly pure oil-free air industrial gas compressor, granklin group production of water lubrication oil-free air compressor, is for this reason came into being. Industrial gas compressor is also called air compressor, it is a large energy consumption, Granklin water lubricated air compressor with intelligent frequency conversion energy saving characteristics, for enterprises is undoubtedly good news, can save a lot of power resources.
View detailsWhen the air compressor is short of water, just like we feel thirsty and need to replenish water, it also needs some "care" to return to normal. Don't worry, here are a few tips that might help you solve this problem. First, you can check.
There are significant differences between oil-free compressors and micro-oil compressors in many aspects, which are mainly reflected in the working principle, compressed air quality, operating costs, maintenance requirements, performance and so on. The following is a detailed analysis of the difference between the two: 1.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
