2026-04-09Views：
Screw air compressor as a wide range of general machinery, is used in all aspects of production. According to the different lubrication methods can be divided into oil-free air compressor and air compressor. What is the difference between the two?
1. to different oil contents, oil-free and oil-free air compressors generally refer to the oil content of the gas discharged from the exhaust port of the air compressor. Generally, oil-free air compressors have a large oil content. Oil-free oil is not free, but contains less oil, about 0.01ppm. Therefore, this oil content can be used to distinguish oil-free and oil-free air compressors. There is a full oil-free air compressor, it is not the use of oil lubrication, but the use of water lubrication, so the discharge of the gas does not contain oil called oil-free air compressor.
2. works differently. From a structural point of view, there is no difference between the bearings of oil-free air compressor and oil-free air compressor. But from the working principle, there are obvious differences between the two. Oil-free air compressor in the process of operation is not involved in the oil, whether it is oil-free piston machine or oil-free screw air compressor, they will produce a lot of high temperature in the process of operation, if there is oil air compressor oil The participation will take away the high temperature generated in the compression process of the air compressor, thereby cooling the machine.
3. oil-free air compressor is not involved in the oil, and in the process of compression may produce a lot of high temperature, easy to cause high temperature failure. How to reduce the occurrence of high temperature failure?
In fact, the oil-free air compressor uses water to replace the oil to solve the high temperature in the air compressor compression process, thus achieving the purpose of oil-free compression.
Oil-free air compressor because of its water to lubricate the compressed gas is cleaner than the oil injection air compressor. So the food, medical and other industries often use oil-free screw air compressor.
Screw air compressor does not belong to special equipment. According to relevant national laws and regulations, special equipment is divided into pressure vessels, elevators, lifting machinery, large amusement facilities, etc., and screw air compressors are not clearly included in this category. Although the screw type air
The air microbiological standards of food factories are very important to ensure food safety. The following are detailed from four aspects: monitoring indicators, limit requirements, detection methods and prevention and control measures: 1. core monitoring indicators Floating bacteria (Airborne Microbes) Definition: suspended in the air
In chemical, pharmaceutical, food and many other industries, oil-free screw air compressor is widely favored for its clean and efficient characteristics. When it comes to which brand of oil-free screw air compressor is more respected, the water-lubricated screw air compressor produced by Shanghai Granklin Group
Air compressors with oil and without oil are not absolutely good or bad. Their use occasions are different from those suitable for working conditions. If they are used for purging, machining, manufacturing and power, it is OK to choose air compressors with oil and slight oil, but in some occasions, oil-free air must be used.
The pressure range of compressed air for industrial use varies depending on the application scenario and the type of equipment, but there are usually the following standards: 1. General industrial pressure range General standard: The pressure of compressed air for industrial use is usually between 0.7 and 1.0 megapascals (MPa), which is suitable for most industrial scenarios.
An oil-free gas compressor is a compressor that does not use lubricating oil in the compression process. Because it does not produce oil pollution in the compression process, it is widely used in industries that require high purity of compressed air. The following are the main oil-free gas compressors
Not all lathes need to be equipped with air compressors. Whether they are equipped depends on the type of lathe, the processing requirements and the degree of automation. The specific analysis is as follows: 1. the types of lathes that need to be equipped with air compressors and the automation requirements of CNC lathes (CNC): if CNC lathes need to realize self
The reasons for the increase in electricity consumption of air compressors may be the following: improper selection of air compressors: when some enterprises purchase air compressors, they may overemphasize the one-time investment, performance indicators and energy consumption indicators of air compressor equipment, while ignoring the characteristics of their own gas consumption.
In hotel operations, air compressors (air compressors) support the operation and service processes of a variety of key equipment by providing stable and clean compressed air, thereby enhancing customer experience, ensuring operational efficiency and reducing maintenance costs. The following is the main installation of air compressor in the hotel
Permanent magnet frequency conversion technology is a high-efficiency energy-saving technology applied in Granklin air compressor, and its core is to realize the precise use of energy through intelligent adjustment. "Permanent magnet" means a motor that uses permanent magnets to generate a magnetic field that does not require additional electrical energy to maintain the magnetism
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
