2026-04-09Views：
Q: How often is the air compressor maintained correctly?
Granklin Air Compressor Answer: The oil filter and lubricating oil need to be replaced for the first time after the brand-new air compressor is started and operated for 500 hours. It is similar if it is Granklin's water lubricated air compressor.
In the later period, maintenance shall be carried out according to the use environment and the use time of the three filters of the air compressor and the oil products. The air filter shall be replaced in 2000 hours, the oil filter shall be replaced in 3000 hours, the oil core shall be replaced in 4000 hours, and the lubricating oil shall be replaced in 3000 hours.
Different air compressor maintenance cycle is different, but also after the telephone consultation for good.
Maintenance according to frequency of use
generally speaking, for the frequently used air compressor, the maintenance cycle should be at least once a month. Air compressors with low frequency of use can be maintained every 3-6 months.
Maintenance according to working environment
the local environment where the air compressor works is poor, for example, the air contains more dust, sand, and water vapor, and the maintenance cycle needs to be adjusted in time.
Which processes in the electronics industry will use air compressors-taking the water-lubricated screw air compressors of the Granglin Group as the core In the rapidly developing electronics industry, air compressors, as a key power equipment, are widely used in many process links.
In the field of highly precise semiconductor testing, compressed air is not only an important power source for the operation of the production line, but also a key factor to ensure test accuracy and product yield. For the semiconductor tester, the quality, dryness, cleanliness and pressure of the compressed air
Oil-free and water-lubricated permanent magnet frequency conversion screw compressor is an efficient and environmentally friendly compressed air equipment. Its main uses and application advantages can be summarized as follows: 1. main uses provide pure oil-free compressed air: due to the use of water as a lubricant, Completely eliminated
When discussing the relationship between compressed air outlet pressure and workshop pressure, we must first clarify several key points. The outlet pressure of compressed air refers to the gas pressure output by the air compressor or related equipment, while the workshop pressure refers to the pressure transmitted to the various uses of the workshop.
In the hot summer, with the increase of ambient temperature, the work efficiency and energy consumption of air compressor become increasingly prominent. High temperature environment will not only lead to a decrease in air density, increase the operating burden of the air compressor, but also may affect its cooling effect, thereby increasing energy consumption and reducing work efficiency.
Shanghai water lubricated oil-free screw air compressor is an advanced air compressor equipment, which has the advantages of environmental protection, energy saving, high efficiency and stability. It is widely used in medicine, food, chemical industry, electronics, textile and other industries. The following is about Shanghai water lubrication oil free snail
Screw compressors and scroll compressors have their own unique advantages and application scenarios. However, from a wide range of application practices and technical characteristics, screw machines show more outstanding performance in the field of general gas supply. Especially in the Shanghai Granklin Group production.
Screw air compressor start and stop intermittent only 30 seconds may be caused by a variety of reasons. First, this intermittent work may be related to changes in load demand. When the load demand fluctuates or changes in a short period of time, the screw air compressor may start according to the demand.
Oil content and filtration accuracy are two different concepts, but there is a certain relationship between them. First, let's explain these two concepts: Oil content: This usually refers to the content of oil in a unit volume (such as per cubic meter), usually in mg/m & sup
The compressed air pressure generally used in machining centers needs to be kept stable and is usually within a certain pressure range. The following is a specific description of the compressed air pressure of the machining center: Pressure range: The pressure of the compressed air used in the machining center is usually
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
