2026-04-15Views：
Permanent magnet frequency conversion technology is a high-efficiency energy-saving technology applied in Granklin air compressor, and its core is to realize the precise use of energy through intelligent adjustment.
"Permanent magnet" means that the motor uses permanent magnets to generate a magnetic field, which does not require additional electrical energy to maintain magnetism, which reduces energy loss compared to traditional motors; "frequency conversion" adjusts the motor speed through an intelligent control system and automatically adjusts the operating state according to the actual gas demand. Avoid the waste of "equipment idling" or "insufficient gas supply.
In Grantklin water lubricated single screw air compressor, permanent magnet frequency conversion technology can accurately match the output and usage of compressed air. When the gas demand is low, the motor automatically reduces the speed to reduce unnecessary energy consumption; when the demand increases, the motor responds quickly to maintain a stable gas supply. This dynamic adjustment not only improves energy efficiency, but also reduces equipment operating noise and extends the service life of key components.
Through the combination of permanent magnet frequency conversion and water lubrication single screw design, granklin air compressor not only ensures the cleanliness of compressed air, but also achieves lower energy consumption and more stable operation, helping users to achieve efficient and energy-saving production goals.
The air compressor power corresponding to the 37kw motor is 37kw. However, to convert it to horsepower (HP), the following calculation can be referred to: 1 horsepower (HP) is approximately equal to 0.75 kW (KW). Therefore, the 37 kW (KW) of the air compressor corresponding to the horsepower (HP) can pass 3
When the air compressor is used in pressure reduction, the change of its flow rate is not a simple process of increase or decrease, but is affected by many factors. First of all, we want to make it clear that the flow of the air compressor usually refers to the air compressor unit time under a certain pressure.
The relationship between the pressure generated by the air compressor and the distance is a complex physical phenomenon, involving the combined effect of multiple factors. The following is a detailed description of this relationship: When the air compressor is working, it generates pressure by compressing gas. The magnitude of this pressure is not only
When it comes to the maintenance of air compressors, many people first think of the replacement of oil. However, for the water-lubricated screw air compressor produced by Shanghai Granklin Group, this question has a different answer. Water lubricated screw air compressor, as a
Compressor dynamic equipment does not belong to special equipment, but as long as the working pressure of the gas storage tank and the connected pipeline is greater than or equal to 0.1Mpa, the volume and pipe diameter are greater than or equal to 25mm, it belongs to special equipment. The oil and gas separator on the air compressor is as follows: volume: 0.063m & sup3;, design
In industrial production, the quality of compressed air directly affects the final quality of the product, in which the water content of the air is one of the important indicators to measure the quality of compressed air. Shanghai granklin group production of water-lubricated screw air compressor, combined with efficient cold dryer system
In the activation process of fluorine chemical polymerization catalyst, the pressure dew point of compressed air (that is, the temperature at which the compressed air starts to condense into liquid water at a specific pressure) needs to be strictly controlled to ensure the activity of the catalyst and the efficiency of the polymerization reaction. Specific requirements and suitability of Granklin air compressor
The pressure values of air compressors vary depending on their type, design, and usage scenarios. The following is a detailed summary of the pressure value of the air compressor: Common pressure range: Under normal circumstances, the operating pressure of the air compressor is 6-8
Hospital air compressors play an important role in medical facilities, providing compressed air for various medical equipment and systems. These compressed air is widely used in operating rooms, intensive care units, dental clinics, laboratories and other areas of hospitals
Whether the air compressor room is an explosion-proof place or not should be judged comprehensively according to the specific environment and equipment characteristics. The core basis is as follows: 1. The core definition of explosion-proof place Explosion-proof places refer to the areas where flammable and explosive gases, dust or vapors exist or may be generated, which need to be specially designed (such
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
