2026-04-09Views：
The difference between an oil air compressor and an oil-free air compressor is that the working method is different and the final discharge gas is different.
1. way of working
1. Oil air compressor: There is lubricating oil in the head of the oil air compressor itself,
2. Oil-free air compressor: Oil-free air compressor does not contain lubricating oil in this working process and is lubricated with water.
2. the final exhaust gas is different
1, oil air compressor: oil air compressor with oil lubrication, so the final discharge of the gas containing oil.
2, oil-free air compressor: oil-free air compressor with water lubrication, so the final discharge of the gas does not contain oil.
Oil-free air compressor is cleaner and more environmentally friendly than oil-free air compressor to some extent, so institutions such as hospitals, laboratories, schools and other institutions are very suitable for the use of oil-free air compressor, and these institutions also prefer to use oil-free air compressor.
For the demand of 28 cubic meters of air consumption per hour, several key factors need to be considered when selecting an air compressor, including the displacement of the air compressor, the working pressure, the use environment and efficiency. The following are some suggestions to guide the choice of how much air compressor: 1. displacement meter
Analysis of Water Treatment Method for Water Accumulation in Air Compressor Pipeline During the operation of air compressor, water vapor in compressed air is easy to form water accumulation in the pipeline when it is cold and condensed. If it is not treated in time, it may lead to equipment corrosion, gas end failure, product quality decline and other problems. Water from the following
Q: What industry will use the air compressor? A: The role of the air compressor is mainly to provide air power. 1. Drive various pneumatic machinery; 2. Used for remote transportation of gas and natural gas; 3. Spray blasting; 4. Synthetic polymerization
When discussing whether the water-cooled screw machine can always run at full load, we first need to understand the working principle and design characteristics of the water-cooled screw machine. Water-cooled screw air compressor, as a widely used air compression equipment in the industrial field, its core lies in its efficient and stable pressure
The connection mode of the two air compressors is mainly parallel and series, and the specific choice depends on your gas demand, site conditions and equipment characteristics. The following is a detailed description of the two connection methods and operating guidelines: 1. parallel connection (recommended for increasing gas supply) is suitable
The power frequency air compressor, that is, the air compressor driven by a fixed power supply frequency (usually 50Hz or 60Hz), has its specific advantages and disadvantages. Advantages: simple structure: the design of the power frequency air compressor is relatively simple and the maintenance is more convenient. Lower cost: compared
Air compressor blowing out of the gas with water is a normal phenomenon. The following is a detailed explanation of this phenomenon: The cause of 1. moisture Humidity in the air: The air in its natural state always contains a certain amount of moisture, the so-called humidity. When the air is compressed, this water
When the factory chooses the air compressor for the air pressure nitrogen generator, the selection of frequency conversion and power frequency should be combined with the comprehensive evaluation of gas characteristics and operation requirements. The core difference between the two lies in the air supply adjustment mode: the variable frequency air compressor can dynamically adjust the speed according to the actual air consumption to realize on-demand air supply;
The oil content of the air compressor at the outlet of the oil injection screw machine (I. e. oil injection screw air compressor) is an important performance index, and its specific value is affected by many factors, including the design of the air compressor, the working state, and the use of post-processing equipment. The following is a strict view of the problem.
Scroll machine and screw machine have their own advantages and applicable scenarios, can not simply say which is better. The following are some of their comparisons: Efficiency: Screw machines usually have higher efficiency, especially under high load and continuous operation. And the scroll machine in
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
