2026-04-09Views：
The main maintenance method of screw air compressor is to replace three filters and one oil. The main methods are:
1. Air filter element. It needs to be replaced after 1500 hours of work;
2. Lubricating oil filter element. Daily use for about 2000 hours needs to be replaced;
3. Oil and gas separator. Normal 3000 hours need to be replaced, according to the use of environmental decisions;
4. Lubricating oil. Different types cannot be mixed, and the filter needs to be replaced when changing the oil.
Screw air compressor maintenance to do three filter an oil, specific:
1. Intake air filter. Its main function is to filter dust and impurities in the air, so that clean gas enters the rotor and is compressed for use. If the filter element is blocked or malfunctions, polluting particles or larger impurities will enter the machine, affecting its work Efficiency and service life, so the air filter element generally needs to be tested and cleaned once a week, and needs to be replaced when the working 1500 is small;
2. Lubricating oil filter element. After the lubricating oil filter is blocked, a large amount of particulate dust will enter the host, affecting the work of the machine. It will be replaced within 500 hours of the running-in period of the new equipment and about 2000 hours of daily use;
3. Oil and gas separator. Play the role of separating lubricating oil and compressed air. If the separation effect is weakened, the oil content in the air cannot be effectively separated, which will increase fuel consumption. Normal maintenance needs to be replaced after 3000 hours of operation. At the same time, it can be replaced in advance according to the working environment;
4. Lubricating oil. The quality of lubricating oil determines the stability and service life of the equipment. In addition to not mixing different types of oil, it should be replaced according to the working environment after 2000 hours of work, and the filter also needs to be adjusted.
Screw air compressor in the operation of the need to pay attention to what matters?
1. It is necessary to check the working condition of the equipment during the daily operation of the air compressor. The abnormal operating state will increase the power consumption and cause frequent start and stop of the equipment to cause motor failure;
2. Do not have volatile toxic and flammable gases in the working environment of the equipment, otherwise it will cause the air inlet to be blocked and affect the operation;
during operation, any abnormal sound or vibration in the equipment should be stopped immediately for inspection.
Screw air compressor has good stability, low noise and low energy consumption during operation, and is more popular in the market. Therefore, it is necessary to pay attention to product quality and manufacturer's qualification when purchasing.
In the complete air supply scheme of the pharmaceutical factory, the water lubricated air compressor is generally used with drying equipment and filtering equipment to ensure that the air sent to each air point is clean and stable.
Lubricating oil is usually not needed and should not be added to oil-free air compressors. The original intention of the oil-free air compressor is not to use lubricating oil during the compression process to avoid mixing oil into the compressed air, thereby ensuring the purity of the output air. The addition of lubricating oil may
Oil-free air compressors also need to be drained. The working principle of the oil-free air compressor is mainly to compress the inhaled air through mechanical parts such as pistons, screws or turbines, and then output it as high-pressure gas. In this process, because the air itself contains
The advantages of oil-free water-lubricated screw air compressors mainly include: low cost of use: this type of air compressor uses water as the compression and sealing medium, replacing traditional lubricating oil, thereby reducing the cost of use. Compressed air is pure: through advanced sealing
When comparing adsorption dryers and freeze dryers (cold dryers), both have their own advantages and applicable scenarios, so it is impossible to generalize which is better. Adsorption dryers, usually using adsorbents (such as silica gel, activated alumina, etc.) to adsorb moisture in compressed air, from
In the production process of the bottle blowing plant, the air compressor is one of the key equipment, and its performance and stability directly affect the operating efficiency and product quality of the bottle blowing machine. For whether to choose water lubricated air compressor, this is indeed a problem worthy of in-depth discussion. water lubricated air
A medium-pressure compressor, usually a compressor capable of providing compressed air in the medium pressure range (e. g. 20-100 bar). Compressors of this type play an important role in many industrial applications. The following are some of the main advantages of medium pressure compressors: Efficient energy
The calculation of the air consumption at the end of the air compressor is a process involving multiple factors, which usually needs to be determined according to actual needs and usage scenarios. The following are some commonly used calculation methods and considerations: 1. basic formula Air compressor end gas consumption can be through the following public
The standard of air quality for fermentation is a very important topic! Imagine that if there are too many "uninvited guests" in the air, such as microorganisms, dust and impurities, they may disrupt the fermentation process and make our efforts useless.
The air filter (air filter) replacement cycle of an air compressor depends on a number of factors, including the environment in which the air compressor is used, air quality, running time, and the quality of the filter. Generally speaking, the replacement cycle of air filter is recommended to be every 2000 to 4000 hours or according
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
