2026-04-10Views：
Air compressors are not special equipment. Special equipment refers to boilers, pressure vessels (including gas cylinders), pressure pipes, elevators, hoisting machinery, passenger ropeways, large amusement facilities and special motor vehicles in the field (factory), which involve life safety and high risk, and the general air compressor is not included in these categories. Therefore, for ordinary air compressors, it is not considered special equipment. However, if the air compressor is used as a part of the pressure vessel, and the pressure of the pressure vessel reaches a certain standard, then this pressure vessel is a special equipment and needs to be supervised and managed in accordance with relevant regulations. In the actual situation, it should be judged whether the air compressor belongs to special equipment according to the specific usage scenario and equipment characteristics.
Oil-free air compressor and oil-free air compressor have their own advantages and disadvantages, which is better depends on the specific application scenarios and needs. The advantage of the oil air compressor is that it has good lubrication performance, which can reduce the wear of internal parts, thereby extending the service life of the machine
The power of the air compressor needs to be considered comprehensively, including the gas consumption, working pressure, running time, pipeline pressure loss, altitude and ambient temperature of the gas equipment. The following are some specific guidelines: 1. determine the gas consumption of gas-using equipment and
Compressed air stainless steel pipe selection and installation standards In the compressed air system, the pipeline is the core carrier of gas transmission, and its material and installation quality directly affect the stability, cleanliness and safety of the system. Granklin water lubricated screw air compressor output oil-free, dry
GMP (Good Manufacturing Practice) has strict requirements on the quality of clean compressed air to ensure that it will not introduce pollution in the pharmaceutical production process and ensure product quality and safety. Specific standards can be summarized as follows: microbial control: compressed air does not
There are significant differences between oil-free air compressors and ordinary compressors in many aspects. These differences are mainly reflected in the working principle, application field, performance characteristics and maintenance costs. The difference between the working principle of the 1. oil-free air compressor: compressed air
Many people think that oil-free air compressors are truly oil-free, but this is not the case. Usually we think that the oil content of the oil-free air compressor is 0.01ppm, while the oil content of the screw machine we usually use is about 3ppm, which we will recognize above this standard.
The available materials for screw air compressor supply pipelines are roughly divided into pressure hoses (suitable for small screw air compressors or temporary gas use), galvanized pipes, with moderate prices, which are widely used in the installation of screw air compressor pressure pipelines and aluminum alloy super pipes. They are suitable for high requirements on the image of the factory and the quality of gas supply,
When the air compressor is set or adjusted to 8kg, it means that the compressed air pressure output by the air compressor is 8kg force/square centimeter (kgf/cm²). In the field of air compressors, pressure is usually measured in units such as kilograms of force per square centimeter (kgf/cm²) or bar (bar).
In modern industrial production, air compressor as an important power equipment, its performance and efficiency is directly related to the production cost and operational efficiency of enterprises. Recently, I had the honor to experience the water-lubricated screw air compressor produced by Shanghai Granklin Group, which uses permanent magnet frequency conversion.
When starting the air compression system, it is usually recommended to open the air compressor first, and then open the cold dryer. This is because the air compressor is responsible for providing compressed air, and the cold dryer is used for further processing of compressed air, such as cooling, drying and filtering. If
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
