2026-04-14Views：
Air compressor drainage needs to be finished.
during the use of the air compressor, a large amount of condensed water and oil-water mixture will be produced. If these moisture and dirt are not emptied in time, they will stay inside the air compressor and accelerate the aging and damage inside the air compressor, thereby shortening the service life and reducing the quality of compressed air. In addition, the water that is not emptied in time may also cause the air pipe to be blocked, affecting the normal use effect.
the frequency of drainage should be determined according to the use environment of the air compressor, working conditions and the humidity of the inhaled air. Generally speaking, it is recommended to perform emptying operations regularly to avoid damage caused by moisture accumulation. Especially in humid or cold environments, due to the high moisture content in the air, it is necessary to increase the frequency of drainage.
In summary, in order to ensure the normal operation of the air compressor and prolong the service life, it is necessary to conduct drainage operations regularly and ensure that the water is drained.
Air compressor PM may refer to two meanings here, depending on the context: PM as an abbreviation for permanent magnet frequency conversion: In this case, PM stands for air compressor using permanent magnet synchronous motor and frequency conversion control technology. This technology can improve the air compressor can
When discussing which air compressor is better, the water-lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly the best in the market. This air compressor with its excellent performance, efficient energy saving effect and environmental protection design concept, has won a wide range
Oil-free air compressor and oil-free screw machine each have their own advantages and applicable scenarios, so it is difficult to generalize which is better. The following are their respective characteristics and application, as well as the specific description of the water lubricated oil-free frequency conversion screw air compressor of Shanghai Granklin Group
The air pressure range of the plant usually depends on the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is between 5~13 bar (that is, 500~1300 kPa or 72.5~188.5 psi), because most industrial applications, such as pneumatic tools and machines
The slow pumping of air compressor may be caused by a variety of reasons. The following are some common reasons and corresponding solutions: Common reasons Pollutant blockage: Air inlet or filter system accumulates dust, grease and other pollutants: These impurities will restrict the smooth flow of gas, and then
The calculation of gas consumption in a factory usually involves multiple steps and factors, and the following is a common calculation method: 1. a clear calculation scope New factory: the gas consumption of all gas equipment needs to be calculated, and possible future expansion, leakage and changes in equipment efficiency need to be considered.
Screw type energy-saving air compressor can be frequency conversion, and can talk to the sales manager about the required configuration when purchasing. The advantages of screw type energy-saving air compressor: 1. Energy-saving energy, frequency conversion screw type air compressor is 10% more energy-saving than ordinary air compressor.
Air compressors can be divided into two types: oil-free and oil-free. There are some significant differences between them: material difference: oil-free air compressor itself does not contain oily substances, thus avoiding oil pollution to terminal equipment. Air compressor with oil includes
2 cubic air compression tank belongs to special equipment. In general, the air storage tank we refer to generally refers to the equipment used to buffer compressed air with a volume greater than or equal to 0.1 cubic meters and a pressure greater than or equal to 0.8Mpa. These are all pressure vessels, so conceptually, these are all
The scope of use of compressed air commonly used in factories involves many aspects. The following is a clear summary of its scope of use: Power transmission: As a power source, compressed air is widely used to drive various mechanical equipment, such as pneumatic tools, pneumatic test benches, Transmission
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
