2026-04-10Views：
The scope of use of compressed air commonly used in factories involves many aspects. The following is a clear summary of its scope of use:
power transmission:
as a power source, compressed air is widely used to drive various mechanical equipment, such as pneumatic tools, pneumatic test benches, conveying equipment, painting equipment, vibrators and pneumatic braking systems.
Processing and production:
in the production process, compressed air is used to drive various equipment and tools, such as metal cutting, grinding, casting, spraying, injection molding and welding.
Cleaning and dust removal:
compressed air is used to clean factory equipment and pipes to remove dust, dirt and other particles and ensure their normal operation.
Device control:
in some automated production lines, compressed air is used to control the action of equipment such as pneumatic valves, cylinders, etc.
From the pressure point of view, the commonly used compressed air pressure in the factory is generally between 0.4 and 0.6MPa, but the specific pressure requirements will vary according to different applications and equipment. For example, some precision equipment may require higher pressures to ensure precise control, while some cleaning or spray applications may require lower pressures.
In general, the use of compressed air in factories is very extensive, involving almost all aspects of factory production. In the specific application, it is necessary to select the appropriate compressed air pressure and flow according to the actual demand.
Compressors are widely used in the food industry, mainly in the following aspects: 1. pneumatic operation In the food processing process, compressors provide power for pneumatic equipment, such as mixers, mixers and conveyor belts. These devices require continuous, stable compression of empty
Oil-free air compressors are not necessarily screw-type. Oil-free air compressor is a kind of equipment that realizes air compression through oil-free lubrication technology. Its characteristic is that it does not need to use lubricating oil during operation, so the output compressed air is pure and oil-free. This air compressor
The normal range of oil output of the micro-oil air compressor is about 1-5ppm of exhaust oil content, usually 3ppm is the common standard value. The following is a detailed explanation of this standard: Unit definition: ppm (parts per million concentration) means the mass ratio of oil in a unit volume of compressed air
Power saving efficiency of permanent magnet motor Rare earth permanent magnet motor has a high power ratio and good stability at low speed, so as to overcome many limitations of mechanical transmission device. Direct drive technology is adopted in application occasions to meet the requirements of high mechanical equipment for accuracy, speed and efficiency.
The difference between water-injected screw compressor and oil-injected screw compressor is mainly reflected in the following aspects: lubrication and cooling method: water-injected screw compressor injects water into the compression cavity during the compression process, which can play a lubricating role. Can achieve cooling effect
Generally speaking, the maintenance cycle of the air compressor should be determined according to the specific equipment and production environment, but under normal circumstances, the maintenance cycle of the air compressor is 1 to 2 times a year. Specifically, the cycle of dismantling the machine for a comprehensive overhaul is once a year, while some routine inspections are carried out.
In the field of air compressor, permanent magnet variable frequency screw air compressor with its high efficiency, energy saving and stable characteristics, is gradually becoming the mainstream choice of the market. As a leader in the industry, Shanghai Granklin Group produces water-lubricated screw air compressors with permanent magnet frequency conversion technology.
The main differences between the suction dryer and the cold dryer are as follows: Working principle: The suction dryer: The moisture in the compressed air is adsorbed by the adsorbent (such as silica gel, activated alumina, etc.) to achieve the drying effect. When the adsorbent is saturated, it needs to be regenerated.
Special process gas compressors are compressors specially designed to handle special process gases. These gases may have specific chemical, physical properties or requirements that require specialized compressors to meet their processing needs. Special process gas
Brand Granklin Brand advantage stable and durable service industry big brand cooling method water cooling/air cooling Type Integrated Company Name Shanghai Granklin (Group) Co., Ltd. Transmission Mode
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
