2026-04-10Views：
The air pressure range of the plant usually depends on the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is between 5 and 13 bar (that is, 500 to 1300 kPa or 72.5 to 188.5 psi), because most industrial applications, such as pneumatic tools, mechanical operation, process control, etc., All need to work within this pressure range. However, certain applications may require higher pressures, for example, some painting, powder coating or special manufacturing processes may require pressures as high as 20 to 30 bar (or even higher). Conversely, some light industrial applications or laboratory environments may require lower pressures.
For Shanghai Granklin Group Co., Ltd., they focus on air compressor technology research and development and manufacturing. The products cover many types of air compressors, including water-lubricated air compressors and oil-free air compressors. These air compressors have high efficiency, stable and reliable performance, and have been widely used in various fields. Granklin water lubricated air compressor has a wide range of adjustable pressure, which can be flexibly adjusted according to different needs, providing stable and reliable power support for various industrial applications.
Therefore, the specific factory normal air pressure range needs to be determined according to the actual application requirements and the type of air compressor used. In practical applications, it is recommended to refer to the instruction manual of the air compressor or consult professional technicians to determine the appropriate air pressure range.
The above information is for reference only and is not a professional recommendation. The specific pressure range may vary with different equipment, processes and environmental conditions. In actual operation, please be sure to follow the relevant safety regulations and operating guidelines.
The functions of the water-lubricated oil-free screw air compressor mainly include the following: Provide oil-free compressed air: The water-lubricated oil-free screw air compressor can output completely oil-free compressed air. This is particularly important for industries with high requirements for compressed air quality, such
The single screw compressor consists of a cylindrical screw and two symmetrically arranged planar star wheels, which are installed in the casing. The screw groove, the inner wall of the casing (cylinder) and the star gear teeth form a closed volume. The power is transmitted to the screw shaft, and the star wheel is driven by the screw to rotate.
View detailsYes, semiconductor production requires the use of air compressors. In the semiconductor production process, air compressors are mainly used to provide clean and dry compressed air to meet the process requirements of production equipment. For example, in the wafer manufacturing process, it is necessary to use an air compressor to provide
The main maintenance method of screw air compressor is to replace the three filters and one oil. The main methods are: 1. Air filter element. It needs to be replaced after 1500 hours of work; 2. Lubricating oil filter element. Daily use about 2000 hours need to be replaced; 3, oil and gas
In industrial production, the stable operation of oil-free air compressor depends on the good condition of the parts. For the water-lubricated screw air compressor produced by Shanghai Granklin Group, regular replacement of key parts is the key to ensure its efficient and reliable operation. water-lubricated screw
The requirements of automation equipment for compressed air mainly involve pressure, flow, cleanliness and dryness to ensure the normal operation of the equipment and extend its service life. The following are the specific requirements of automation equipment for compressed air: pressure stability: automation
The calculation of equipment gas consumption (converted into cubic meters) should be combined with equipment parameters, operation time and gas state (such as pressure and temperature). The following are detailed steps and examples: 1. the core formula Volume flow calculation If the equipment is known to be in the standard state (0°C,1 atm)
Whether the compressed air tank belongs to special equipment depends on its design pressure and volume. According to publicly released information, only industrial compressed air tanks with a design pressure greater than 0.1MPa are regarded as special equipment and need to be managed in accordance with specific laws and regulations.
Chemical plant air compressor is a machine used to generate high-pressure gas. Its main functions include providing the gas required for production, providing oxygen for the combustion reaction, and providing compressed air for the cleaning process. Specifically, it has a wide range of uses, involving the following aspects:
Whether the pipeline of air compressor belongs to special equipment depends on its working pressure, volume and pipe diameter. Generally speaking, as long as the working pressure of the gas tank and the connected pipeline is greater than or equal to 0.1Mpa, and the pipe diameter is greater than or equal to 25mm, it belongs to special equipment.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
