2026-04-09Views：
The air filter of the power-saving air compressor needs to be replaced. How to purchase a good air filter?
Today, Shanghai granklin group air compressor manufacturers to introduce, air filter generally from the following aspects to distinguish between good and bad quality.
1. Waterproof performance
filter paper should have excellent waterproof performance, filter paper waterproof performance is not good, will accelerate the air filter clogging.
2. Filtering precision and filtering area
efficient filter material, professional design of fiber structure, can effectively ensure the filtration accuracy and filtration area, and ultimately extend the service life of air filter.
3. High quality shell and seal
high-quality housing and seals can ensure the rigidity and compressive strength of the air filter itself, as well as reliable sealing under ambient temperature changes.
4. Ash holding capacity
A large amount of filter paper can absorb dust and will not completely block the gaps in the fibers to hinder the circulation of clean air.
For how to choose the power-saving air compressor equipment suitable for you, please contact us, sales telephone number: 13918023456 contact person: Mr. Hu.
With its ability to provide stable and clean compressed air, the special air compressor for laser cutting machine is widely used in many industries with strict requirements on cutting accuracy and material handling. Its core application fields and values are as follows: 1. sheet metal processing industry Application scenarios: metal
In the bio-fermentation industry, the quality and stability of compressed air is critical to production efficiency and product quality. Therefore, the choice of suitable air compressor has become an important part of fermentation enterprises can not be ignored. The water-lubricated screw air compressor produced by Shanghai Granklin Group is based on
Q: What are the requirements for compressed air in the semiconductor industry? A: The compressed air used in the chip industry must meet the highest standards, and the production environment must be pollution-free, and the gas must be oil-free. Compressed air mainly in the field of semiconductor chips
There are indeed obvious differences between the cold dryer and the suction dryer, which are mainly manifested in the following aspects: Working principle: The cold dryer uses the principle of freezing and dehumidification, and uses the heat exchange between the refrigerant and the compressed air to reduce the temperature of the compressed air to 2 ~ Dew in the range of 10°C
The oil content of the compressed air of the oil-injected screw air compressor usually needs to be controlled within 3ppm(3 mg/m & sup3;), but the specific standards vary according to the application scenario. The following is a detailed description: 1. general industrial standards stipulate: such as "Air Compressor Pollutant Emission Standard" (GB/T
The life of an oil-free air compressor is not necessarily shorter than that of an oil-free air compressor. Its life depends on a number of factors, including equipment quality, maintenance, operating environment and usage. In fact, because the oil-free air compressor avoids the use of lubricating oil.
Is water needed in the air compression system? -- Analysis of the technical innovation of Grantklin water-lubricated air compressor In the traditional air compression system, water usually does not exist as the core functional medium, and its role may be limited to the post-processing link (such as cooling and drying). But...
Factory air compressor conventional air pressure: In the factory environment, the conventional air pressure of the air compressor is usually determined according to the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is 5-13 bar (I .e. 500-1300 kPa or 72.5-188.5 psi)
The calculation of the gas consumption of workshop equipment is a complex process involving multiple factors, which requires comprehensive consideration of the type, quantity, working status of the equipment and the actual demand for gas. The following is a rigorous and detailed calculation: 1. determine the type and quantity of equipment first.
The main methods of removing moisture from air compressors are as follows: Cold and dry water removal: Principle: Use compressed air to enter the cooler to reduce the surface temperature to below the dew point, and the water vapor condenses into water droplets, which are then discharged from the drain. Features: simple and low cost, but in addition to water
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
