2026-04-09Views：
There is no definite time standard for the replacement of air compressor maintenance oil. For general mineral lubricating oil, 2000-3000 hours are recommended, semi-synthetic lubricating oil 4000-6000 hours are recommended, and fully synthetic lubricating oil 6000-8000 hours are recommended. Maintenance and replacement of lubricating oil depends not only on the type and quality of the oil, but also on the working environment and running time to determine the replacement frequency.
At present, there are many brands of air compressor lubricants on the market. Different brands and different types of base oils and additives are different. Due to the different quality of lubricants, the replacement time is determined. It is necessary to choose suitable lubricants and cannot be mixed.
The operating environment will also affect the loss of oil. The surrounding environment temperature is high, and the equipment operation burden will increase, which will increase fuel consumption. Therefore, it is necessary to regularly inspect the equipment and always pay attention to the oil level of the oil sight glass. If the lubricating oil is not enough or the color is wrong, Add or replace the lubricating oil in time.
Pay attention to when changing lubricating oil:
1. Oil can only be released when the air compressor is shut down and there is no pressure in the machine and the machine body is at normal temperature;
2. Open the oil drain valve to drain the oil into a suitable container, until no oil flows out when the valve is closed;
3. Remove the temperature control bypass valve and drain the remaining lubricating oil in the main engine;
4. Fill up new lubricating oil (the oil exceeds 1/2 of the oil sight glass) after the oil is released, and tighten the bolt of the oil filling hole;
5. Start the air compressor to run for 10 minutes, stop the machine to check the oil level, and if it is insufficient, add lubricating oil.
6. The replaced waste oil is likely to cause pollution and fire, and must be collected and disposed of in accordance with local laws and regulations.
Air compressor oil change as far as possible to find professional air compressor maintenance and maintenance technicians, so as to avoid some details of the poor grasp and affect the service life of the entire unit, bring unnecessary losses.
The standard of compressed air in food factories is mainly to ensure the purity and quality of compressed air to meet the hygiene and safety requirements of food processing and production. The following are the standards for compressed air in food factories, which are expressed and summarized as follows: Purity:
Oil-free air compressor is widely used in many occasions because of its unique characteristics and advantages. The following are some of the main applications of oil-free air compressors: University laboratories: pure, oil-free compressed air is often used in the laboratory to ensure the experimental results
Oil-free air compressors are particularly suitable for use in the following situations: 1. industries with high air quality requirements Food industry: Food production requires extremely high air quality, and any small pollutants may affect the hygiene and quality of food. Oil-free air compressor can lift
According to the oil content of the exhaust gas, the air compressor can be divided into oil air compressor, micro oil air compressor and oil free air compressor. The following is a detailed analysis of the oil content of these three air compressors: 1. oil content of oil air compressors: oil air compressors will
The service life of the air filter of the air compressor is not fixed, it mainly depends on the actual working conditions and the use environment. The following are some general guidelines and references: Life under ordinary use environment: Under normal working conditions, high-quality air compressor air filter
Screw air compressor as a wide range of general machinery, is used in all aspects of production. According to the different lubrication methods, it can be divided into oil-free air compressor and oil-free air compressor. What is the difference between the two? 1. the oil content is different, the air compressor has
The air time of the air compressor can be adjusted. There are mainly the following methods to adjust the air time of the air compressor: Adjust the pressure switch: The pressure switch is an important part of the air compressor. By adjusting the adjustment knob on the pressure switch, the start of the air compressor can be changed
Air compressor selection in textile industry: dry oil-free vs. oil-free lubrication in textile production, compressed air is the core power source for driving looms, cleaning equipment and control systems, and its quality directly affects product quality and equipment life. For the "textile industry
Common oil-free air compressor applications 1, gold plating, copper plating industry applications. In the cleaning process of electroplating, it is necessary to use a compressor to remove water from the surface of the object, and the use of an oil-free air compressor can keep the plating smooth. 2. Medical treatment
As an important form of energy generation, air compressor is widely used in various industries, and there are many details in its maintenance. Do a good job of maintenance, in order to extend the service life of the air compressor. In this regard, we put forward a few suggestions: 1, should be
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
