2026-04-14Views：
When the screw air compressor has excessive moisture, a series of measures need to be taken to solve the problem. The following is a detailed description of the countermeasures:
first, check the cooling system of the screw air compressor. Since the cooling system typically uses water or other coolant to reduce the temperature of the compressor, a leak or malfunction in the cooling system can cause moisture to enter the interior of the compressor. In order to solve this problem, the tightness and integrity of the cooling system should be checked regularly, any leaks should be repaired in time, and the normal circulation of the coolant should be ensured.
Secondly, pay attention to the air inlet and air filter of the screw air compressor. If the air inlet or air filter is contaminated or blocked, it may cause humid air to be sucked into the compressor, thereby increasing the internal moisture. Therefore, the air filter should be cleaned and replaced regularly to ensure the smooth flow of the air inlet to reduce the entry of humid air.
In addition, for the water that has accumulated inside the screw air compressor, drainage measures can be taken. Some screw compressors are designed with drain valves or outlets through which the accumulated moisture can be drained. If the air compressor does not have its own drainage device, you can consider installing a drain valve in an appropriate position to discharge water regularly.
At the same time, in order to prevent the problem of excessive moisture in the screw air compressor, some additional measures can be taken. For example, maintain a good ventilation and dry environment around the air compressor to avoid the influence of humid air on the air compressor; regularly maintain and inspect the air compressor to ensure its normal operation and timely detection of problems; and according to the use environment and working conditions, Select the appropriate coolant and lubricating oil to reduce the impact of moisture on the air compressor.
In summary, when the screw air compressor has excessive moisture, the cooling system, air inlet and air filter, drainage measures and preventive measures should be started to solve the problem comprehensively. Through regular inspection and maintenance, to ensure the normal operation of the screw air compressor and prolong the service life.
The range of gas source pressure commonly used in factories is usually between 0.4MPa and 0.8MPa, and the specific value varies with industry, equipment type and process requirements. The following is a detailed analysis: 1. core pressure range and industry adaptability General industrial scenario 0.4MPa - 0.6
The long-term non-shutdown of the air compressor does have a series of effects, which are mainly reflected in equipment wear, energy efficiency, and potential operational risks. The following is a detailed analysis of these effects: 1. equipment wear and aging compressor parts load plus
In the activation process of fluorine chemical polymerization catalyst, the pressure dew point of compressed air (that is, the temperature at which the compressed air starts to condense into liquid water at a specific pressure) needs to be strictly controlled to ensure the activity of the catalyst and the efficiency of the polymerization reaction. Specific requirements and suitability of Granklin air compressor
The replacement cycle of air compressor filters, including air filters (air filters) and other types of filters (such as oil filters, water filters, etc.), depends on many factors, such as the air compressor's use environment, working load, The quality of the filter and the manufacturer's recommendations.
There may be several reasons for the lack of air in the oil-free air compressor: The intake valve is blocked or damaged: If there is a problem with the intake valve, the compressor will not be able to inhale air, which will result in the inability to compress the air. At this time, it is necessary to check whether there is a problem with the intake valve and
In the field of industrial production, the performance parameters of air compressors are directly related to production efficiency and product quality. For application scenarios that require 20 cubic meters of displacement per minute, it is particularly important to choose a suitable air compressor. Water-lubricated snail produced by Shanghai Granklin Group
When the gas consumption of the equipment is known, calculating the size of the air compressor required involves two key aspects: pressure and gas consumption. The following are the specific calculation steps: Determine the pressure requirement: understand the normal pressure range of all equipment, and take the maximum and minimum
The calculation of plant gas consumption is a systematic work, which requires comprehensive consideration of equipment requirements, production processes, environmental factors and other aspects. The following are detailed calculation methods and key strategies: 1. plant gas consumption calculation method 1. New plant gas consumption calculation design.
The oil of the oil air compressor does not specifically refer to the bearing lubricating oil, but refers to the lubricating oil used to lubricate and cool the internal parts of the air compressor, usually referred to as air compressor oil or air compressor special oil. The main functions of the oil of the oil air compressor include: lubrication: reducing the internal parts of the air compressor
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
