2026-04-10Views：
When the gas consumption of the equipment is known, calculating the size of the air compressor required involves two key aspects: pressure and gas consumption. The following are the specific calculation steps:
determine pressure requirements:
understand the normal pressure range of all equipment, and take the maximum and minimum values.
The air compressor is selected according to the maximum increase of 1kg pressure, which is to take into account the pressure loss and pipeline pressure loss of the air compressor after-treatment equipment.
Calculation of air consumption:
know the rated gas consumption (Q) of all gas-consuming equipment and accumulate them.
Understand the simultaneous start-up rate (a%) of the whole process, and then multiply Q by a% to obtain the demand (Q1).
Considering the backup machine of the air compressor and the problem of increasing the air consumption in the later period, the margin of 10% to 20% is increased, that is, the displacement of the air compressor that needs to be deployed.
For example, if the required gas volume is 75 cubic meters, you can consider purchasing three 40 cubic meters of air compressors and adopt the "open two for one" method. If the required gas volume is 375 cubic meters, then 6 100 cubic meters of air compressors can be purchased, and the method of "opening four and preparing two" is adopted.
In addition, the air volume of the air compressor is usually calculated in cubic per minute (m & sup3;/min). Therefore, in the calculation, it is necessary to determine the required air compressor size according to the air consumption per minute when the equipment is used. For example, if the equipment requires 7 cubic meters of air consumption per minute, an air compressor greater than 7 cubic meters should be selected, such as 7.5m & sup3;/min air compressor.
Please note that the above is only a general guide, the actual choice of air compressor also need to consider other factors, such as the specific working conditions of the equipment, ambient temperature, altitude and so on. If in doubt, it is recommended to consult a professional air compressor supplier or engineer for more accurate advice.
Whether the air compressor room needs to focus on seepage control depends on many factors, but in general, seepage control measures are necessary. The air compressor room is usually equipped with air compressors and related equipment, which may produce vibration, noise and certain liquid seepage during operation.
There are significant differences between oil-injected compressed air (take oil-injected screw air compressor as an example) and oil-free compressed air in many aspects, including lubrication mode, use environment, structural characteristics, energy efficiency and compressed air quality. The following is a detailed description of these differences.
When the screw air compressor shows that the host is unbalanced, it may be caused by a variety of factors. First of all, you can check whether the power supply and wiring port are loose or the wires are not compressed, which may cause the air compressor host to be unbalanced. Secondly, the fault of the current transformer or controller is also
Screw air compressor belongs to the category of positive displacement compressor. The working principle of a positive displacement compressor is to compress gas by changing the volume of the working chamber. Screw air compressor is such a compressor, which uses the rotation of the screw to change the volume of the compression chamber.
When choosing an air compressor, the two types of oil-free and oil have their own advantages, just like two artists of different styles, each has its own unique charm and advantages. Oil-free air compressor, like a pursuit of pure painter, its works-compressed empty
Displacement of air compressor flow related terms: displacement is the total working volume formed in one revolution of the air compressor, in m3 or cm3. Volume flow: also known as displacement or nameplate flow, refers to the air compressor unit time under the required rated exhaust pressure
The maintenance cycle of the screw air compressor usually depends on the use of the equipment and the manufacturer's recommendations. Generally speaking, the maintenance cycle of the screw air compressor can consider the following aspects: Operating hours: Many manufacturers recommend running the equipment for a certain number of hours
Water-lubricated oil-free air compressor-the innovative choice of Shanghai Grankering Group With the continuous advancement of technology, more and more companies and industries have begun to seek efficient and environmentally friendly equipment to meet their production needs. in the compressed air collar
The normal service life of the air compressor is a relatively complex problem, which is affected by many factors, including the quality of the equipment, the use of the environment, maintenance and workload. Generally speaking, if the air compressor can be properly maintained and maintained, and
The pneumatic pressure usually supplied by the factory is not a fixed value, but is determined according to various factors such as specific application scenarios, equipment requirements and production processes. The following is a detailed description of the factory pneumatic pressure supply: one of the 1. pneumatic pressure
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
